Werbung
Verfügbare Sprachen
Verfügbare Sprachen
é
Operation using Batteries: Remove the battery compartment lid and in-
stall 9 batteries in the compartment.
(See diagram @)) The batteries can
easily be removed by pushing as shown in the diagram.
Note:
When the unit is not in use or used on AC power (mains) for a long
period of time, the batteries should be taken out of the battery
compartment.
Battery check: Pull the Level Indicator selector () to the '""TUN/BATT"'
position.
If the LED level indicator @7) is in the black area, the batteries are
strong enough for use.
If it is in the orange area, the batteries are too
weak
and
the recorder
will not operate
satisfactorily.
Change
the
batteries.
Operation using car battery: To operate using a car battery, insert one
end of the car adaptor into:the DC 13.5V socket
and the other end into
the cigarette lighter of your car.
This will automatically disconnect the
batteries.
Note:
Use the car adaptor with negative (—) chassis ground.
DC 13.5V
carers Semmes ©,
Operation using AC power (mains): Insert one end of the AC power
(mains) lead into the AC socket @) and the other end into a convenient AC
outlet.
This will automatically disconnect the batteries.
To return to
battery operation, disconnec the AC power (mains) lead from the AC
socket
Note:
Disconnect the AC power (mains) lead plug from the AC outlet
when the unit is not to be used with AC power (mains) for a long
period of time or you are away from home.
E3
Werbung
