Philips RC670 Bedienungsanleitung Seite 6

INITIAL SETTINGS
+ Enter the Initial Settings menu.
- Select one of the option you want to modify
+ Alter the Choice.
* Leave the Initial Settings menu :
»)
Ra
4
v 60
=}
C2),
4
Option Choice
(aor y) (AST )
TIME * (OFF, 12H, 24H]
SRC * [CDC, AUX]
REMOTE IN, Y]
PHONE [NO, LO, HI]
BLEEP [-2, -1, 0, +1, +2,]
LOGI [OFF, ON]
LED {OFF, ON]
LOUD {LOW, MID, HI]
TAPE* [-2, -1, 0, +1, +2,]
cD* [-2, -1, 0, +1, +2,]
CDC* or [-2, -1, 0, #1, +2,]
AUX*
* Depending on version
Usage
Select the desired clock format. (See 'SETTING THE
CLOCK').
Source connected to Connector C.
- Select 'CDC' for a CD changer (H&SX type).
- Select 'AUX' for a portable audio player.
Select 'Y' to connect a remote control (EA2001).
Select 'LO' or 'HI' according to phone ('LO' in most cases).
Select 'NO' if no phone is connected.
Select volume level of confirmation beeps.
Select 'ON' to limit the use of the set to one hour when the
car ignition is switched off.
Select 'OFF' to switch off the flashing warning light when the
front is removed.
Select the level of loudness control.
Volume level of TAPE relative to tuner
Volume level of CD relative to tuner
Volume level of CD changer or AUX input relative to tuner.