Velleman CAMCOLVC4 Bedienungsanleitung Seite 7

10. Troubleshooting
• To preserve the operational life of your SD memory card, store it in
a dry place and do not touch the gold contacts on the memory
card.
• This camera does NOT support hot swapping of the memory card, so
make sure to turn off the camera before removing the memory
card, failure to do so may result in loss of data or operational
problems.
Note: When using a new card, the new card must be formatted in
FAT/FAT16 format before using.
Symptom
The camera is unable
to store pictures or
cannot display an
image.
LED light will not go
out.
LED light will not go
on.
Camera can take
pictures, but cannot
open the file.
08/04/2009
CAMCOLVC4
Description
1. Contacts on the SD
memory card are dirty.
2. The SD Memory is
not formatted properly.
3. SD Memory card
damaged.
1. The camera is in
STANDBY mode
2. The SD memory
card is full.
1. SD Memory card
damage or SD Memory
card is not formatted.
2. No power
The SD Memory card
has a poor connection
to the camera.
7
Recommended Action
Clean the contacts with a soft
cotton cloth, and plug the SD
card into the device again.
Try to format again in FAT file
format; this camera doesn't
recognize other file formats.
Change to a new card, but
the new card must be
formatted FAT before using.
Reset the camera power.
Delete some pictures for
more space.
Try formatting the card first
or change to a new card. The
new card has to be formatted
in FAT format.
Check the power supply; use
a new one if faulty.
Remove and insert the SD
Memory card, twice.
©2008 Velleman Components nv
®