Velleman CAMCOLVC4 Bedienungsanleitung Seite 6

• Press the 'start'- button ( ) to start capturing camera images. Press
the 'stop'-button (
• Go to 'Option' to configure camera settings e.g. brightness,
saturation, output size ....
• When the camera is running, press the
snapshot. A thumbnail is shown in the application window. Select a
thumbnail and press the
-button to save all snapshots. Enter the desired storage directory.
Caution: when closing the application, snapshots that are not saved
to disk are lost.
9. Review images on SD card
• Images saved on the SD card can be transferred to a PC.
• Plug the A-plug of the included USB cable into a free USB port.
• Make sure the power ON/OFF switch [7] is in the OFF position.
• Plug the mini-B connector into the mini USB port [6].
• The PC will recognize the CAMCOLVC4 as an extra disk and
prompts what to do. Select 'Open folder to view files'.
• All images are located under the 'DCIM'-directory. Copy the desired
files to the PCs' hard disk.
• It is also possible to use the
CAMCOLVC4 software to
copy images. Locate the
MR97316MarsPCAM icon on
the desktop and double
click it. The application
opens:
• Choose the source image(s)
and define the target
folder. Press the 'Go' button
to copy the selected
image(s).
Note: Always stop the device before unplugging the USB cable. Use
the 'Safely remove hardware'-icon in the notification area to open the
dialog box and stop the appropriate USB storage device.
08/04/2009
CAMCOLVC4
) to stop.
-button to save it to disk, or press the
6
-button to take a
©2008 Velleman
®
Components nv