Werbung
Verfügbare Sprachen
Verfügbare Sprachen
▪ Have your power tool repaired only by qualified specialists and only with
original spare parts. This ensures that the safety of the power tool is
maintained.
▪ Allow the device to cool down for 15 minutes after charging or intensive use.
Failure to follow this instruction could result in overheating or fire.
▪ Do not open, disassemble, compress, heat above 60 °C or incinerate the
device. Do not throw into fire or similar.
▪ Be careful when using the device near flammable or easily meltable materials
such as plastic or glass.
▪ Not aim the device at one and the same place for a long time.
▪ Never point the switched-on device at people, animals, plants, flammable
objects or liquids.
▪ Do not use the device in an explosive atmosphere.
▪ Be aware that heat can be conducted to combustible materials that are
obscured.
▪ Always keep the air vents clean to avoid overheating of the device and risk of
fire.
▪ Only use original accessories.
▪ If the device is damaged, stop using the device and have it repaired by a
specialist or contact our customer service. Do not disassemble the device or
attempt to repair it yourself.
Safety instructions for battery-powered devices
WARNING: Li-Ion batteries, if incorrectly used, stored or charged are a fire, burn
and explosion hazard.
Cordless devices do not belong in household
The batteries must be properly disposed of
together with the devices.
waste.
10
Werbung
