Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Software configuration:
TCP/IP protocol must be installed on all PCs which are to use the internet. By default, the IP address
192.168.2.1 and an activated DHCP server are configured for the router. That means that the connected PCs
are automatically given appropriate addresses and other settings. We recommend using these. Select
TCP/IP setting "Get IP address automatically" for all PCs connected to the router. You can then configure the
router using the web browser. The browser must be Java-capable and the Java function must be activated
(e.g. Internet Explorer 5.0 or better, or Netscape Navigator from version 4.71).
To start the configuration process, open your browser and enter "http://192.168.2.1" as the address. Select
router from the menu which appears (see below).
The login window is then displayed. Initially the user name is set to "admin" and the password is 1234. After
entering these click on OK to log on to the router.
After logging on configuration may begin after you have clicked on
For " Time Zone" choose the appropriate time zone, e.g "GMT +01:00)Amsterdam, Berlin, Bern, Rome,
Stockholm, Vienna" for Germany.
Do not alter any of the other settings (see above).
Click
First, you must set the access protocol. In Europe, this is generally PPPoE (e.g. T-Online, 1&1). The rest of the
description is based on this setting.
.
Access is configured as follows:
User Name: Provider user name
Password: Provider password
Service Name: if necessary, please ask your provider.
.
Werbung
