Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SETTING FURTHER CHANNELS
Searching for channels from the
cable provider automatically
1 Open the menu with »MENU«.
2 Select the menu item »SOURCE SETUP«
with »
« or »
« and press »OK« to
V
Λ
confirm.
– The »SOURCE SETUP« menu appears.
3 Select the line »Source« with »
or »
« and press »OK« to confirm.
Λ
Select the option »Cable« with »
»
« or »
« and press »OK« to confirm.
V
Λ
4 Select the line »Automatic Channel Search«
with »
« or »
« and press »OK« to
V
Λ
confirm.
– The menu appears.
SOURCE SETUP
AUTOMATIC CHANNEL
Connection Type
Country
Scan Type
Cable Scan Type
Frequency (MHz)
Network ID
Exit
Back
5 Select the line »Scan Typ« with »
and set the option »DTV« with »
Television / User Manual
6 Select the line »Cable Scan Type« with »
«
V
<
>
«, »
«,
Note:
7
xx.xx.xxxx
15:46
SEARCH
Cabel
7 Start the scan with » « (red).
U.K.
DTV & ATV
Note:
Quick
Auto
7
Auto
Start Search
Note:
« or »
«
V
Λ
7
<
>
« or »
«.
8 Press »MENU« to end the setting.
-----------------------------------------------------
or »
« and set the option »Quick« or »Full«
Λ
<
>
with »
« or »
«.
– The search function »Quick« sets the
channels according to the information
provided by your cable provide in the
transmission signal.
– If the option »Full« is selected, the entire
frequency range will be scanned. The
search can take a long time with this
option. This option is recommended if
your cable provider does not support the
search type »Quick«.
You can accelerate the search. To do this,
you need information about the frequency
and network ID. You are usually able to get
this data from your cable operator or find it
in forums on the Internet. For example, the
frequency 402MHz and network ID 61441
can be entered for Germany.
– All channel and favourites lists will be
deleted and compiled anew.
After starting the scan, a security query will
appear. Press » « (green) to confirm the
option »Yes«.
– The »Results« menu appears, and the
scan for channels begins. Depending on
the number of channels received, this can
easily take a few minutes.
– The scan is complete as soon as the
»PROGRAM TABLE« appears.
You can abort the search by pressing
»MENU«.
«
V
EN 80 / 67
Werbung
Inhaltsverzeichnis
