Operating The Beater; Cleaning - Westfalia 82 69 67 Bedienungsanleitung

ting 1 and change the speed according to your requirements.
Hint: The speed regulator can only be used with the ON button I.
After use, first remove the plug from the wall socket and then
6.
detach the blender stick from the motor unit by pressing both re-
leasing buttons (7) simultaneously.

Operating the Beater

The beater (3) is also equipped witch 4 notches, so the locking pins
(7) on the motor unit will fit exactly into these notches. For locking
the beater make sure the locking pins (B) on the motor unit fit exact-
ly into these notches.
Hints:
 When blending directly in the pan while cooking pay attention not
to overheat the blender.
 When blending some hard foods like herbs, garlic, carrots, pota-
to etc. please add in the container a few water. Start blending
solid food in smaller quantities and add more food to achieve
good blending.
 Do not immerse the blender stick for more than 15 cm into liq-
uids to avoid liquid to come in contact with the motor unit.
 Do not operate the blender stick for more than 60 seconds con-
tinuously. Let the unit cool down before next use.

Cleaning

 Before cleaning, please pull the power plug and allow the unit to
cool down!
 Do not immerse the motor unit in water or any liquids!
 Use only a moist cloth to clean the motor unit. Allow the unit to
dry fully before next use.
 After processing very salty and acidic food you should rinse the
blade right away. Do not touch the blade while cleaning. It is very
Operation
15