Disposal; Technical Data; Wiring Diagram - Daikin LMS Serie Installationsanleitung

9

Disposal

Wooden, plastic and polystyrene packing must be disposed of
according to the regulations in force in the country where the unit is
used.
NOTICE
Do NOT try to dismantle the system yourself: dismantling
of the system, treatment of the refrigerant, oil and other
parts MUST comply with applicable legislation.
Final disposal of the unit must be done by an authorised
area technical assistance service, that has proper training,
equipment and instructions for the dismantling. They are
also responsible for reuse, recycling and recovery.
CAUTION
There are potential environmental hazards involved in
dismantling the unit.
10

Technical data

▪ A subset of the latest technical data is available on the regional
Daikin website (publicly accessible).
▪ The full set of latest technical data is available on the Daikin
Business Portal (authentication required).
10.1

Wiring diagram

▪ A printed version of the declaration of conformity, the wiring- and
piping diagrams is included with the unit.
Wiring diagram legend
For applied parts and numbering, refer to the wiring diagram on the
unit. Part numbering is by Arabic numbers in ascending order for
each part and is represented in the overview below by "*" in the part
code.
Symbol Meaning Symbol Meaning
Circuit breaker
contact
MS Compressor
3
Connection
Connector
Contactor contact
M
Expansion valve
MS Fan
Fuse
M
Fuel pump
M
Generator
3
Heater
LMSEY1A09/13 + LMSEY2A19/25
Daikin LMS
4P728170-1B – 2023.07
Noise filter
Power supply plug
Pressure switch
p
Protective earth
Relay
Relay contact
Resistor
Solenoid valve
Speed sensor
Temperature sensor
t°
Terminal
Symbol Meaning Symbol Meaning
Inverter reactor
Main switch
LMSEY1A09+13AVM01
Symbol Meaning
ACU Unit controller
CF1 Condensor fan
C1 Compressor
C1 (cable) Supply cable
C2 (cable) Door heater cable
C3 (cable) Room light cable
C4 (cable) Door switch cable
C5 (cable) Inverter supply cable
C6 (cable) PWM inverter 1 cable
EDH Evaporator drain heater
EF1 Evaporator fan
EVM Electronic expansion valve
F1 Main line fuse
F2 Main neutral fuse
F3 Line aux fuse
F4 Neutral aux fuse
HMI User interface
HMI cable User interface cable connection
HPS High pressure switch
INV Inverter compressor
J21A TH1-TH7 probes male connector
J21B TH1-TH7 probes female connector
J22A PWM inverter male connector
J22B PWM inverter female connector
J23A TH3-TH5-TH6 probes male connector
J23B TH3-TH5-TH6 probes female connector
J24A Room light + door switch male connector
J24B Room light + door switch female connector
J29A Supply inverter male connector
J29B Supply inverter female connector
K1M Drain heater relay
K2M Drain heater relay
K3M Compressor relay
RDH Room door heater
RDS Room door switch
RL Room light
SV2 Defrost solenoid valve 1
TH1 Discharge compressor probe
TH3 Suction air probe
TH5 Evaporator inlet probe
TH6 Evaporator outlet probe
TH7 Condensor probe
X1M Suppy cable terminal
X2M Phase terminal
X3M Neutral terminal
X4M Output terminal
9 Disposal
Terminal strip
Transformer
Installation manual
27