Control Setting And Remote Control; Installation - Klarstein 10028188 Anleitung

Control Setting and Remote Control

Controls on the Unit
Power
Mode
Fan speed
Timer
Up/Down
Controls on the Remote Control
Power
Timer
High/Low
Up/Down
Cool
Fan
Dry
Sleep
Important Hints on Installation
• Leave this mobile air-conditioner in an upright position for at least 2 hours before first use.
• This air-conditioner may be moved indoor conveniently; leave the air-conditioner in an upright
position while moving it.
• The air-conditioner shall be placed on a flat ground surface.
• Do not install or operate this air-conditioner in a bathroom or other wet environments.
13
Press the key to start the unit, and press this key again to turn unit off.
Set the Cooling, Dehumidifying and Fan Mode when unit is working.
Change fan speed low - high. Not available in dehumidifying mode.
To swith the unit on/off automatically.
Increase/deacrease room temperature by 1°C. Change from °C to °F
by pressing these two keys at the same time.
Press the key to start the unit, and press this key again to turn unit off.
To swith the unit on/off automatically.
Change between high fan speed and low fan speed.
Increase/deacrease room temperature by 1°C.
Set this unit to operate in the cooling mode.
set this unit to operate in the air supply mode
Set this unit to operate in the dry mode
Set this unit to operate in sleeping mode

Installation