Inhaltsverzeichnis
Werbung
Please note the included General Safety Warnings
for Pneumatic Tools and the following safety notes
to avoid malfunctions, damage or physical injury:
▪ Read the instructions carefully before use and follow all
given instructions. Keep the instructions in a safe place
for future reference.
▪ Persons with limited physical, sensorial or mental abilities are
not allowed to use the unit, unless they are supervised and
briefed for their safety by a qualified person.
▪ Never leave the unit unsupervised when in use. Keep it out of
reach of children or persons in need of supervision.
▪ Only use this unit according to this instruction manual and for
the intended use. The unit has not been designed for continu-
ous, professional use.
▪ For your own safety it is not recommended to use a permanent
connection between the air chipping hammer and the air hose,
but use the supplied plug nipple instead.
▪ Always control the working air pressure with a pressure
regulator.
▪ The air chipping hammer causes a high sound pressure
level. Wear appropriate hearing protection. Wear
personal protective clothing such as safety goggles,
protective gloves and protective mask if necessary.
▪ Do not use oxygen or flammable gases as power
source. Only use clean, dry air at 6 bar with the air
chipping hammer. Exceeding the max. permitted pres-
sure level of 8 bar will significantly reduce the lifetime of the
tool.
▪ Disconnect the tool from the air supply before applying
maintenance work or inserting or exchanging the chipping
chisel.
Safety Notes
8
Werbung
Inhaltsverzeichnis
