Product Description And Specifications - Bosch GLM Professional 80 Originalbetriebsanleitung

OBJ_BUCH-1347-006.book Page 19 Friday, April 25, 2014 3:28 PM
sensory or mental limitations or a
lack of experience or knowledge if
they have been supervised or in-
structed in the safe operation of
the charger and understand the as-
sociated dangers. Otherwise, there
is a danger of operating errors and in-
juries.
Supervise children. This will ensure
that children do not play with the
charger.
Cleaning and user maintenance of
the battery charger shall not be
made by children without super-
vision.
Technical Data
Digital Laser Measure
Article number
Distance measurement
Measuring range (typical)
Measuring range (typical under unfavourable conditions)
Measuring accuracy (typical)
Measuring accuracy (typical under unfavourable conditions)
Lowest indication unit
Indirect Distance Measurement and Vial
Measuring range
Grade measurement
Measuring range
Measuring accuracy (typical)
Lowest indication unit
General
Operating temperature
Storage temperature
Allowable charging temperature range
Relative air humidity, max.
Laser class
Laser type
Laser beam diameter (at 25 °C) approx.
– at 10 m distance
– at 80 m distance
Bosch Power Tools
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Product Description and Specifica-
tions
Intended Use
The measuring tool is intended for measuring distances,
lengths, heights, clearances, grades and for the calculation of
areas and volumes. The measuring tool is suitable for measur-
ing indoors and outdoors.
GLM 80
Professional
3 601 K72 3..
A)
0.05–80 m
B)
45 m
A)
±1.5 mm
B)
±2.5 mm
0.1 mm
–60° – +60°
C)
0°–360° (4x90°)
D)F)
±0.2°
0.1°
E)
–10 °C...+50 °C
–20 °C...+50 °C
+5 °C...+40 °C
90 %
2
635 nm, <1 mW
6 mm
48 mm
English | 19
GLM 80+R60
Professional
3 601 K72 3..
A)
0.05–80 m
B)
45 m
A)
±1.5 mm
B)
±2.5 mm
0.1 mm
–60° – +60°
C)
0°–360° (4x90°)
D)F)
±0.2°
0.1°
E)
–10 °C...+50 °C
–20 °C...+50 °C
+5 °C...+40 °C
90 %
2
635 nm, <1 mW
6 mm
48 mm
1 609 92A 0KB | (25.4.14)