IKEA LAGAN Bedienungsanleitung Seite 12

ENGLISH
Removing the oven door
To reattach the door, the procedures applied when removing it must be repeated
from the end to the beginning, respectively. When installing the door, be sure to close
the clips on the hinge socket.
1 Open the oven door.
Open the clips in the front door hinge
2 socket on the right and left by pressing
downwards as shown in the figure.
3 Get the oven door to a half-open position.
Pull the removed door upwards to release
4 it from the right and left hinges and
remove it.
Removing the inner glass of the oven door
1 Open the oven door.
Pull the plastic component, attached on
the upper section of the front door,
2 towards yourself by simultaneously
pressing on the pressure points on both
sides of the component and remove it.
As shown in the figure, gently lift the
3 innermost glass (1) towards 'A' and then,
remove it by pulling towards 'B'.
4
If your product has an inner glass (2), repeat the same process to detach it (2).
The first step of regrouping the door is to reassemble the inner glass (2). Place
the beveled edge of the glass to meet the beveled edge of the plastic slot. (If your
5
product has an inner glass). Inner glass (2) must be attached to the plastic slot
closest to the innermost glass (1).
While reassembling the innermost glass (1), pay attention to place the printed
6
side of the glass on the inner glass. It is crucial to place the lower corners of the
innermost glass (1) to meet the lower plastic slots.
7
Push the plastic component towards the frame until a "click" sound is heard.
To download the full version visit www.ikea.com
12