DeLOCK 88021 Bedienungsanleitung

Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without notice
in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by any means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 01/2022
Declaration of conformity
Products with a CE symbol fulfill the RoHS directive
(2011/65/EU+2015/863+2017/2102), which were released
by the EU-comission.
The declaration of conformity can be downloaded here:
https://www.delock.de/produkte/G_88021/merkmale.html
WEEE-notice
The WEEE (Waste Electrical and Electronic Equipment)-directive, which became
effective as European law on February 13th 2003, resulted in an all out change
in the disposal of disused electro devices. The primarily purpose of this directive
is the avoidance of electrical waste (WEEE) and at the same time the support of
recycling and other forms of recycling in order to reduce waste. The WEEE-logo on
the device and the package indicates that the device should not be disposed in the
normal household garbage. You are responsible for taking the disused electrical
and electronical devices to a respective collecting point. A separated collection and
reasonable recycling of your electrical waste helps handling the natural resources
more economical. Furthermore recycling of electrical waste is a contribution to
keep the environment and thus also the health of men. Further information about
disposal of electrical and electronical waste, recycling and the collection points
are available in local organizations, waste management enterprises, in specialized
trade and the producer of the device.
EU Import: Tragant Handels- und Beteiligungs GmbH
Beeskowdamm 13/15, 14167 Berlin, Germany
Hrvatski
Preduvjeti sustava
• Računalo s jednim slobodnim PCI Express x1 / x4 / x8 / x16 / x32 utorom
Sadržaj pakiranja
• PCIe Riser kartica
• Korisnički priručnik
Sigurnosne upute
• Zaštitite proizvod od vlage
• Izbjegavajte antistatički elektricitet prilikom postavljanja kabela
Ugradnja hardvera
1. Isključite računalo i odvojite kabel za napajanje.
2. Otvorite kućište.
3. Umetnite kabel ravno i pažljivo u slobodni PCI Express utor dok čvrsto
nalegne.
4. Sada možete spojiti PCI Express karticu s Riser kabelom.
5.
Vratit kućište i ponovno priključite kabel za napajanje u AC adapter.
ελληνικά
Απαιτήσεις συστήματος
• PC με μια ελεύθερη υποδοχή PCI Express x1 / x4 / x8 / x16 / x32
Περιεχόμενα συσκευασίας
• Κάρτα ανύψωσης PCIe, Εγχειρίδιο χρήστη
Οδηγίες ασφάλειας
• Προστατεύστε το προϊόν από την υγρασία
• Αποφύγετε τον αντιστατικό ηλεκτρισμό κατά την εγκατάσταση του καλωδίου
Εγκατάσταση υλικού
1. Σβήστε τον Η/Υ σας και βγάλτε το καλώδιο τροφοδοσίας από την πρίζα.
2. Ανοίξτε το περίβλημα.
3. Εισάγετε το ίσιο καλώδιο προσεκτικά μέσα στην ελεύθερη υποδοχή PCI
Express, έως ότου τοποθετηθεί σωστά.
4. Τώρα μπορείτε να συνδέσετε μια κάρτα PCI Express με το καλώδιο
ανύψωσης.
5.
Συνδέστε ξανά το περίβλημα και συνδέστε το καλώδιο τροφοδοσίας στην
πρίζα ρεύματος.
User manual
Mode d'emploi
Uživatelská příručka
Manuale utente
Manual de utilizare
Korisnički priručnik
Riser Card PCI Express x1 male
to x1 slot angled with FPC cable
88021 - 15 cm
88022 - 30 cm
English
System requirements
• PC with one free PCI Express x1 / x4 / x8 / x16 / x32 slot
Package content
• PCIe riser card
• User manual
Safety instructions
• Protect the product against moisture
• Avoid anti-static electricity when installing the cable
Hardware Installation
1. Turn off your PC and unplug the power cord.
2. Open the housing.
3. Insert the cable straight and carefully into the free PCI Express slot, until it is
well seated.
4. Now you can connect a PCI Express card with the riser cable.
5.
Reattach the housing and connect the power cord to the AC adapter.
Deutsch
Systemvoraussetzungen
• PC mit einem freien PCI Express x1 / x4 / x8 / x16 / x32 Steckplatz
Packungsinhalt
• PCIe Riser Karte
• Bedienungsanleitung
Sicherheitshinweise
• Produkt vor Feuchtigkeit schützen
• Vermeiden Sie antistatische Aufladung beim Einbau des Kabels
Hardwareinstallation
1. Schalten Sie Ihren PC aus, ziehen Sie das Netzkabel.
2. Öffnen Sie das Gehäuse.
3. Stecken Sie das Kabel gerade und vorsichtig in den freien PCI Express Slot,
bis es fest sitzt.
4. Nun können Sie eine PCI Express Karte mit dem Riser Kabel verbinden.
5.
Schließen Sie das Gehäuse wieder und verbinden Sie das Netzkabel mit dem
Netzteil.
Bedienungsanleitung
Manual del usuario
Instrukcja obsługi
Bruksanvisning
Használati utasítás
Εγχειρίδιο χρήστη
Product-No: 88021-88022
User manual no: 88021-a
www.delock.com