Elitech RC-4 Serie Bedienungsanleitung

Product description
RC-4 The series is divided into two models:RC-4:Built-in temperature
sensor;Optional external temperature sensor;
RC-4HC:Built-in temperature and humidity sensor;Optional external
temperature sensor
LCD screen display
① Power Display
② Stop Recording
③ Start Recording
④ Connect to PC
⑤ Overrun alarm:over the upper
limit,beyond the lower limit
Selection parameters
RC-4
Model
-30 。 C~+60 。 C (-22 。 F~140 。 F)
Temperature Range
-40 。 C~+85 。 C (-40 。 F~185 。 F)
±0.5 。 C/±0.9 。 F (-20 。 C~+40 。 C)
Temperature
±1 。 C/±1.8 。 F (others)
Accuracy
Humidity Range
Humidity Accuracy
0.1 。 C/ 。 F
Resolution
Recording Capacity
16000 groups (MAX)
Logging Interval
10 seconds to 24 hours
Data Interface
USB
Start Method
button start; software start
Stop Mode
button stop; software stop; automatic stop
Software
ElitechLog for Windows or MAC
Report Format Export PDF/EXCEL/TXT via software*
Power Supply CR2450 battery / USB
Battery Life 2 years
Prove EN12830, CE, RoHS
Standard Sizes Overall size: 84 x 44 x 20 mm
Weight 60g
Operation of the recorder
1.Recorder parameter configuration:
1) Please download from elitech us: www.elitechus.com/pages/download or
elitech uk: www.elitecheu.com/pages/software or
elitech br: www.elitechbrasil.com.br Download and install the free
elitechlog software (macos and windows); (if you have already installed
this software, you can ignore this step)
2) use USB Wiring the recorder and computer, The recorder screen appears
" "icon,Open the "Jingchuang Data Center" management software,
click Enter the parameter configuration interface, enter the parameters
to be set, and click "Save Parameters" to complete the parameter
configuration.
Note:(1)Do not disconnect the recorder and the computer before the software does
not pop up a successful save prompt;
(2)After first use or after battery replacement,Be sure to configure the
parameters;
Recorder standby state,wait for keypress to start recording;
① LCD screen
② Key
③ USB Interface
④
External Temperature Sensor(Optional)
⑥ Record the number of points
⑦ Date:moon
⑧ Date:day
⑨ Record Maximum
⑩ Record Minimum
RC-4HC
/ 0~100%RH
±3%RH (25 。 C, 20~80%RH)
/
±5%RH (others)
0.1 。 C/ 。 F; 0.1%RH
2.Recorder starts recording:
Long press the button on the recorder5seconds,screen
display ▶,Logger starts data logging; like ▶ flashing
display,then enter the delayed start state,After the
delay,Automatically start recording;
3.The recorder stops recording:
The recorder is in the start recording state,Long press the
button on the recorder 5 seconds,screen display■,Logger
stops data logging;
4.Data viewing and exporting:
use USB Wiring the recorder and computer,Open the "Jingchuang Data Center"
management software,The recorded data will be automatically downloaded to the
computer, click Enter the data chart interface, you can view the recorded data
and export data reports in PDF\EXCEL and other formats;
Note: Recorder starts recording repeatedly,The parameters must be quickly reset or
saved through the "Instrument Data Center" software,to restart recording.
Replacement battery
Open the battery cover by turning the coin into the groove of the battery cover,
After replacing the battery,Close the battery cover again;
Notice:(1)Please do not replace the battery in the starting state;
(2)After the battery is replaced, be sure to reconfigure the parameters
before use;
appendix
Recorder ×1 Manual ×1 Factory calibration Certificate ×1
USB cable ×1 External temperature probe ×1
Attentions
Please store the recorder at room temperature. If the equipment is not used for a
long time, it should be packaged and stored in a dry and cool environment.
If you are using the recorder for the first time, please use the "data management
center" software to synchronize the system time and configuration parameters.
Before starting the recorder, please briefly press the button to confirm that the
recording and status indicator light flash once at the same time
If the recorder is recording, do not remove the battery.
LCD screen will automatically close after 15 seconds of inactivity (by default).
Press the button again to open the screen.
Any parameter configuration on the "data management center" software will
delete all data recorded in the recorder. Please save the data before saving the
new configuration.
The user shall not change the equipment without authorization. Any
unauthorized changes may a ect the accuracy of the equipment or even damage
the equipment
Please use it within the measuring range of the product
If the battery is insu cient, do not use the recorder for long-distance
transportation.
Even if the battery is exhausted, the recorded data in the recorder can still be read.
This product uses disposable lithium battery, do not directly heat or charge.
Please recycle or dispose of waste products according to local regulations.
The warranty covers any fault caused by the product quality, transportation or
manufacturing process during normal use within one year from the date of
purchase. During the warranty period, any fault caused by the above reasons will
be repaired or replaced free of charge.
The warranty does not apply if any of the following conditions are met:
1. Damage caused by accident, misuse, abuse, alteration, tampering or the buyer's
failure to comply with the specified normal operation procedures;
2. Defect or damage caused by food / liquid overflow or wrong use of power and
voltage;
3. Damage, loss, defect or failure caused by natural events such as fire, flood and
animal or insect disturbance;
4. Scratches and damages of external surface area and external exposed parts
caused by improper operation of users;
5. If any part of the device is replaced with a part not supplied or approved by us,
or the device has been disassembled or repaired by anyone other than authorized
technicians of Jingchuang;
6. Use products, equipment, systems, utilities, services, parts, supplies,
accessories, applications, installation, maintenance, external wiring, connectors
not provided or authorized by Jingchuang, or damage the product or cause service
problems.
Elitech (UK) Limited
Unit 13 Greenwich Centre Business Park
53 Norman Road, London, SE10 9QF
Tel: +44 (0) 208-858-1888
Sales: sales@elitech.uk.com
Support: service@elitech.uk.com
Website: www.elitech.uk.com
Battery ×1
Elitech Technology, Inc.
2528 Qume Dr, Ste 2 San Jose, CA 95131 USA
Tel: +1 408-898-2866
Sales: sales@elitechus.com
Support: support@elitechus.com
Website: www.elitechus.com
Elitech Brasil Ltda
R. Dona Rosalina, 90 - Igara, Canoas - RS,
92410-695, Brazil
Tel: +55 (51)-3939-8634
Sales: brasil@e-elitech.com
Support: suporte@e-elitech.com
Website: www.elitechbrasil.com.br