Herdio HOS-401 Benutzerhandbuch

R
WATERP ROOF INDOOR/OUTDOOR
SPEAKERS
Speaker Size: Color
Model:
White/Black
White/Black
HOS-601 White/Black
OWNER'S MANUAL
www.Herdiotech.com
FCC Requirement
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate
the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions :
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
–
Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Main Speaker
Pairing Speaker Speaker AC Plug
Speakers Installation
These indoor/outdoor weatherproof loudspeakers are manufactured to resist a variety of weather
conditions.Snow, rain and sun (not to be submerged unde rwater).For durability / longevity we do
recommend removing the speakers from the brackets and placing inside during extended extreme
temperatures over 120 degrees and below 0 degrees. The most ideal place to
install these speakers is under the overhangs as they provide
the best protection.Like all speakers, they sound the best when
placed no more than eight feet apart from each other, and
slightly higher than ear level. When choosing the
speaker location - consider the
location of the power source.
The powered speaker should
be placed near the power source.
The passive speaker could be
1.DC IN(POWER)
placed further away and should
2.SPEAKERS TERMINALS
be connected to the
powered speaker.
Back
www.Herdiotech.com
2
English
WIRING
When connecting the speakers, it is very important to
Red=Positive/Black=Negative
observe the correct polarity. This means that the wire
attached to the (+),red, or positive terminals on one
component must be attached to the (+), red, or positive
terminal on the corresponding component speaker output
terminals.Similarly, the (-), Black,Negative or ground
terminals must connect to the respective (-), Black,
Negative,or ground terminals. This is easy to do by locating
the color stripes that appears on the included speaker wire.
If longer wire run is needed use 16 gauge weatherproof
Connect Right and Left Channel Set
wire up to 50 feet.
Placing Speakers
If your application requires the speaker to be
mounted, please follow these direc-tions. Using
the appropriate screws (not included) mount the
bracket. Attach the speakers to the brackets using
the large plastic knobs supplied.
Mounting
To install the bracket on the speaker.Screw the bracket
knobs into the cabinet. Point the speaker toward the
listening area. Once the direction of the speaker has been
determined tighten the bracket knobs securely.
When pos-sible tilt the speakers down to increase longevity
and prevent from the weather elements.
Knob
Method of Use
100-240V AC
Initial Set-Up
Turn ON iPhone, Android, or Other Bluetooth Device Open the
Blue Tooth Function Search Blue Tooth Device: HERDIO
Touch device "Bluetooth" for automatic connection Play Music
via Android and or iTunes Control Volume via Bluetooth
Device and Enjoy.
www.Herdiotech.com
3
English
SPECIFICATIONS
PART NUMBER:
HOS-401 HOS-501 HOS-601
BLUETOOTH VERSION:
Bluetooth 4.0 Bluetooth 4.0 Bluetooth 4.0
AUDIO INPUTS:
Bluetooth Devices Bluetooth Devices Bluetooth Devices
POWER OUTPUTS: 2X 100W MAX POWER . 2X 150W MAX POWER . 2X 200W MAX POWER .
AC100-240V or DC 12V AC100-240V or DC 12V AC100-240V or DC 12V
AUDIO POWER:
4" Injec tion Molded PP C one 5.25" Inject ion Molded PP Cone
6.5" Injection Molded PP Cone
WOOF ER :
Buty R ubber Sur round Buty Rubber Sur round
Buty Rubber Sur round
TWEETER: 1" PET D om e
1" PET D om e 1" PET D om e
COLOR: W hi te/Bl ac k W hi te/Bl ac k W hi te/Bl ac k
WARRANTY: 1 Year 1 Year 1 Year
WARRANTY
All Herdio speaker products have 1 year Limited Warranty against
defects in materials and workmanship. Proof of purchase must
accompany all claims. During the warranty period Herdio will
replace any defective part and correct any defect in workmanship
without charge for either parts or labor.
The Technical Support Center at HERDIO is Available
from Monday to Friday, Excluding Holidays. If you have any
questions feel free to send your messages to our below mail box:
warranty@herdiotech.com
1 YEAR WARRANTY EXTENSION PLAN
How would you like to extend the warranty on your product for 1 YEAR?
Simply write and post a review of the product online.Then, register your
product online at Herdiotech.com or send an e-mail to warranty
@Herdiotech.com including your name,address, and phone numler,
as well as a link to the review.
www.Herdiotech.com
4
English
Speaker Cable
Front