Adam Hall Cameo H1 FULLSNOOT Montageanleitung

INSTALLATION INSTRUCTIONS
H1 FULLSNOOT (WH) / H1 HALFSNOOT (WH)
(LENS HOOD FOR H1 SPOTLIGHT)
PRODUCT INFORMATION
This item is a product-specific accessory intended exclusively for
use with Cameo H1 series spotlights.
These installation instructions do not replace the user manual of the
associated product. Always read the relevant user manual first.
These accessories have no influence on the intended use of the as-
sociated product.
Observe the safety instructions in the user manual of the associated
product!
The technical data given in the user manual may change in connec-
tion with this accessory.
SAFETY INSTRUCTIONS
1. Please read this manual carefully.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Use the accessory in the prescribed manner only.
HAZARD: KEEP OUT OF THE REACH OF CHILDREN! THE PRODUCT
CONTAINS SMALL PARTS THAT CAN BE SWALLOWED AS WELL AS
PACKAGING MATERIAL THAT CAN BE SWALLOWED! PLASTIC BAGS
MUST BE KEPT OUT OF THE REACH OF CHILDREN!
INCLUDED
Remove the product from the packaging and remove all packaging
material.
Please check the completeness and integrity of the delivery and
notify your distribution partner immediately after purchase if the de-
livery is not complete or if it is damaged.
The product CLH1SNOOT(WH) includes:
- Snoot lens hood (A)
- Installation instructions
The product CLH1HALFSNOOT(WH) includes:
- Halfsnoot lens hood (B)
- Installation instructions
MOUNTING
1. Before installation, ensure that the spotlight is completely discon-
nected from the power supply.
2. Loosen the 4 screws from the end ring on the front of the spotlight
using a suitable tool and remove the end ring from the spotlight.
3. Place the snoot lens hood (A) or halfsnoot (B) on the front of the
spotlight and fasten it with the previously loosened screws (see illus-
tration).
Please note: The halfsnoot lens hood can be rotated when installed
on the spotlight and has 4 locking points at 0°, 90°, 180° and 270°.
In addition, the lens hood can be adjusted to any intermediate posi-
tion.
TECHNICAL DATA
Item
number:
Product type:
Type:
Colour:
Material:
Dimensions (Ø
x H):
Weight:
Cameo ® is a registered brand of the Adam Hall Group
Adam Hall GmbH | Adam-Hall-Str. 1 | 61267 Neu Anspach | Germany
Phone: +49 6081 9419-0 | adamhall.com
A
CLH1SNOOT
(WH)
Spotlight accessory
Snoot lens hood for
Cameo H1 series
black (CLH1SNOOT)
white (CLH1SNOOT-
WH)
Metal
128 x 76 mm
0.220 kg
B
CLH1HALFSNOOT
(WH)
Spotlight accessory
Halfsnoot lens hood for
Cameo H1 series
black (CLH-
1HALFSNOOT)
white (CLH-
1HALFSNOOTWH)
Metal
128 x 45 / 99.6 mm
0.225 kg