1. Installation Nehmen Sie den Kontaktgrill aus der Verpackung und stellen Sie das Gerät auf eine ebene, feste Unterlage. Bitte achten Sie darauf, dass das Gerät nicht in unmittelbarer Nähe von brennbaren Gegenständen aufgestellt werden soll. Die aktuellen Brandschutzvorschriften sind unbedingt zu beachten. Es wird empfohlen, die Gussplatte gründlich zu reinigen.
2.2. Programmieren des Timers Hinweis: Der Timer schaltet das Gerät nicht automatisch ab. Nach Ablauf der pro- grammierten Zeit ertönt ein 5-maliger Signalton und der Bildschirm erlischt. Manuell programmieren Um den Timer manuell zu programmieren, halten Sie die Tasten „-“ und „+“ gleich- zeitig vier Sekunden lang gedrückt.
4. NENNLEISTUNG 6. Spezifikationen Art.-Nr. Ausführung Spannung Leistung Abmessung 150900 klein – gewellt / gewellt 220 – 240 V / 50 / 60 Hz 2000 W 290 x 470 x 270 mm 150910 klein – gewellt / glatt 220 – 240 V / 50 / 60 Hz...
Seite 5
1. INSTALLATION Take out the Contact Grill from the packaging and locate the unit on a firm level surface. When this appliance is to be positioned in close proximity to a wall, partitions, kitchen furniture, decorative finished, etc., it is recommended that they be made of non-combustible material, if not, they shall be clad with a suitable non-combusti- ble heat-insulating material, and that the closet attention be paid to fire prevention regulations.
2.2. Programming the timer Remind: The timer will not automatically shut off your unit. Once your programmed time has lapsed, the unit will beep 5 times and the screen will go blank. Program manually To manually program the timer, hold both “-” and “+” at the same time for four se- conds.
Seite 7
3. LEAKAGE CURRENT 4. POWER RATING 6. BASIC SPECIFICATION Code Voltage Power Dimension 150900 small – wavy / wavy 220 – 240 V / 50 / 60 Hz 2000 W 290 x 470 x 270 mm 150910 small – wavy / smooth 220 –...
Seite 8
Schneider GmbH In der Längerts 1 D -73095 Albershausen Phone: +49 (0) 71 61 / 30 04 -0 Fax: +49 (0) 71 61 / 30 04 -50 Email: info@schneider-gmbh.com www.schneider-gmbh.com...