1. Installation Nehmen Sie den Flaschenwärmer aus der Verpackung und stellen Sie das Gerät auf eine ebene, feste Unterlage. Bitte achten Sie darauf, dass das Gerät nicht in unmittelbarer Nähe von brennbaren Gegenständen aufgestellt werden soll. Die aktuellen Brandschutzvorschriften sind unbedingt zu beachten. Der Flaschenwärmer ist betriebsbereit.
4. NENNLEISTUNG 6. Spezifikationen Art.-Nr. Ausführung Volt / Hz Leistung Abmessungen 150620 1-fach 220 – 240 V / 50 / 60 Hz 200 W 165 x 187 x 325 mm 150630 2-fach 220 – 240 V / 50 / 60 Hz...
Seite 4
1. INSTALLATION Take out the Warmer from the packaging and locate the unit on a firm level surface. When this unit is to be positioned in close proximity to a wall, partitions, kitchen furniture, decorative finished, etc., it is recommended that they be made of non- combustible material, if not, they shall be clad with a suitable non-combustible heat-insulating material, and that the closet attention be paid to fire prevention regulations.
Seite 5
4. POWER RATING 6. BASIC SPECIFICATION Code achievement Volt / Hz Power Dimension 150620 1-fold 220 – 240 V / 50 / 60 Hz 200 W 165 x 187 x 325 mm 150630 2-fold 220 – 240 V / 50 / 60 Hz...