Jacques Lemans JL.CX M24 Bedienungsanleitung

Crown and button operation
Crown position
0 click 1st click
Turn clockwise for
Crown Free(No effect)
date change
Alarm time setting
4H button Free(No effect)
(at 6H small circle)
Time setting
1. Pull the crown out to the 2nd click position when the second hand
is at the 12 o'clock position.
- If the alarm has been set and the crown is pulled out to the 2nd click position, the alarm
hands will turn to indicate the current time.
2. Turn the crown to set the hour and minute hands.
- Take a.m./p.m. into consideration when setting the hour and minute hands to the desired time.
- The hands be set to the time a few minutes ahead of the current time, taking into
consideration the time required to set the alarm hands.
- When setting the minute hand, advance it 4 to 5 minutes ahead of the desired time and
then turn it back to the exact time.
3. Push the crown back to the normal position.
Alarm setting
・The alarm can be set to ring only once at a designated time within the coming 12 hours.
・The alarm time can be set in one minute increasements.
* Setting the alarm time
Crown
Pull out
1st. position
[*1]
Press 4H button repeatedly to set the alarm hands to the desired alarm time.
The alarm hands move quickly when the 4H button is kept pressed. They stop when the hands reach to the current time.
Release and press the 4H button, the alarm hands will start moving again.
*Stop the alarm time
・At the designated time the alarm rings for 20 seconds, and it is automatically disengaged as it stops.
It is possible to stop ringing manually when pressing any button.
*Cancel the alarm (when alarm time is set)
Crown
Pull out
1st. position
[*2] Press and hold 4H button until alarm hands stop and indicate the current time.
INSTRUCTION MANUAL
Display
Hour hand
2nd click
Small second hand
Time setting
Time setting for
alarm
Alarm hour hand
Date setting
1. Pull the crown out to the 1st click position.
2. Turn the crown to set the date.
- Do not set the date between 9:00 p.m. and 1:00 a.m..
3. Push the crown back to the normal position.
Tips : When the date change during daytime, it happens when a.m./p.m. is wrongly set.
Advance the hour hand by 12 hours.
4H button Crown
Set the alarm time Push back
[*1] Normal position
4H button Crown
Cancel the alarm Push back
[*2] Normal position
JL.CX
Y M24
Minute hand
0 → 1 → 2
Crown
Date
4H Button
Alarm minute hand
Power depletion warning function
When the battery nears its end, the small second hand moves at
two-second intervals instead of the normal one-second intervals. In
that case, have the battery replaced with a new one as soon as possible.
- While the small second hand is moving at two-second intervals, the alarm will not ring
even if it is engaged.
This is not a malfunction.
The watch remains accurate while the small second hand is moving at two-second intervals.