Herunterladen Diese Seite drucken

Werbung

codice
quote fissaggi e raccordi
code
xing and connection measures
A
B
PA001.BI
245
190
PA002.BI
290
200
GR001.BI
265
115
GR007.BI
270
115
GR002.BI
265
115
A5001.BI
355
165
A5002.BI
355
165
305
DS026.BI
215
445
240
145
DA004.BI
330
140
A5N01.BI
3
1_Predisporre gli scarichi secondo le quote
riportate sulle schede tecniche e bloccare i
due fissaggi al pavimento secondo le misure
C
D
riportate nell'illustrazione.
- - -
140
Prepare the draining systems and the hydraulic
connections according to the technical sche-
100
140
mes and then block the two xings on the oor
in accordance with the measures in the picture.
- - -
100
- - -
100
2_Predisporre il raccordo per lo scarico del-
90
100
la cassetta secondo la misura nel particolare
ingrandito. Nel caso di installazione con sca-
- - -
140
rico a parete posizionare il raccordo di sca-
rico sulla parete secondo la misura riportata
140
140
nell'illustrazione. A questo punto posiziona-
re il pezzo sopra i due fissaggi tenendolo
330
250
distaccato da parete almeno 5 cm e farlo
scivolare fino alla parete facendo attenzio-
ne che i due raccordi si innestino perfetta-
100
mente (attenzione: per agevolare l'innesto
si consiglia di lubrificare entrambe le parti).
- - -
140
Prepare the connection for the cistern draining
according to the dimensions shown in the pic-
ture. In case of "P" trap installation you must
place the draining connection on the wc and
cut it according to the dimension shown in the
picture. Then place on the two xings the pie-
ce which must be kept detached almost 5 cm
from the wall, let it slide to the wall taking care
of the two connections which must perfectly
engage to each other (Attention: to make the
clutching easier we suggest to lubri cate both
sides).
3_Bloccare il vaso con le apposite viti di fis-
saggio facenti parte del kit ed applicare so-
pra le due borchiette di copertura cromate.
Block the wc with the appropriate xing kit
and then apply the two cover chrome rings.
Scarico pavimento
"S" trap
Tubo di scarico
Draining connection
C
Scarico parete
"P" Trap
Scarico pavimento
"S" trap
D
Scarico pavimento
"S" trap
Scarico parete
"P" trap

Werbung

loading

Inhaltszusammenfassung für Globo PA001.BI

  • Seite 1 “P” trap due fissaggi al pavimento secondo le misure riportate nell’illustrazione. Scarico pavimento “S” trap PA001.BI - - - Prepare the draining systems and the hydraulic connections according to the technical sche- PA002.BI mes and then block the two xings on the oor in accordance with the measures in the picture.
  • Seite 2 1_Prédisposer les évacuations en respectant les 1_Preparar los desagües respetando las medidas 1_Bereiten Sie die Ab üsse gemäß den auf den dimensions indiquées dans les ches techniques. indicadas en las chas técnicas y bloquear las dos Datenblättern angegebenen Abmessungen vor Bloquer les deux xations au sol selon les dimen- jaciones al pavimento respetando las medidas und blockieren Sie die beiden Befestigungen auf...

Diese Anleitung auch für:

Pa002.biGr001.biGr007.biGr002.biA5001.biA5002.bi ... Alle anzeigen