Moree Studio LED Pro 36 Bedienungsanleitung

Construction Diagram
REMOVE PROTECTIVE PLASTIC FILM!
DISCONNECT THE
PRODUCT FROM THE
MAINS BEFORE OPENING.
1) Assemble 3) Screw the table
the stand top on the stand to
8 x Screws secure the assembly
8 x Screws
5) Adjust 2) Feed the
the 4 feet cable down
4mm
as required the stand
4) Secure the wire in
place using the wire
guide underneath
Remote Control (IR)
[1] Single Press [2] Double Press
[1] White light
[2] Warm white light
[1] Colour selection cycle
(Blue-Magenta)
[2] 3 minute RGB colour change
programme
[1] Colour selection cycle
(Green-Cyan)
[2] Pulse programme
[1] Colour selection cycle
(Red-Yellow)
[2] 90 second RGB colour change
programme
Colour selection button; can be used
at any time to choose the colour be-
ing displayed.
To activate the previous programme
or choose other programmes please
push the off/ reset button.
Off/ reset-button
Before use remove the battery's protective sheet.
Note: Colours printed on the remote may differ from those
displayed by the LED unit.
All manuals and user guides at all-guides.com
Maintenance
Plastic Table Top
• clean with a soft, damp cloth only. Do not use abra-
sives, alcohol or solvent based cleaners.
Stainless Steel Base
• clean with stainless steel cleaner
Glass Top
• clean with glass cleaner
Upgrade IR to RC
As standard Moree LED Pro products are equiped with infrared
technology (IR). The upgrade from infrared to radio equipment
(RC) allows you to control many LED products, using a RC
remote control or computer dongle, at the same time, at a great
distance. So one can, for example, illuminate large halls by
pressing a button in a particular colour. In addition, the upgrade
includes 20 colours and 12 programs.
Disposal/ Ecology
Packaging materials and appliance are made from recyclable
materials. Seperation of the remaining waste materials into
different types facilitates the recycling of valuable raw materi-
als. When the appliance is to be no longer used please dispose
of it in the proper manner.
This Symbol on the product indicates that it should not be dis-
posed in the normal household waste. Please take it to a recy-
cling point for electrical and electronic appliances to be
recycled in a proper manner.
Also rechargeable batteries which are dead or defective
should not be disposed of in the household rubbish; always take
them to a special waste disposal and make an important con-
tribution to protecting our environment.
Please obtain information on disposal from your local
authority.
Original Packaging
The device can be safely transported in the origi-
nal packaging. If insufficient protective packaging is
used, the customer is liable for any damages during
transportation.
PLEASE KEEP THE ORIGINAL PACKAGING AND USE IT,
IF POSSIBLE, IN CASE OF WARRANTY OR RETURN OF
THE EQUIPMENT.
Distribution
Refer to our website for the latest information about our
products.
www.moree.de
Moree Ltd.
Kaiserswerther Markt 11
40489 Düsseldorf
Germany
Designed and produced by Moree in Germany © 2011
Design Patented. Products are subject to change.
STUDIO 36/45/75/105 LED PRO
Bedienungsanleitung (DE)/ Instruction Manual (EN) - IR Version
Mod. Studio LED Pro 36 (16-04-01) / 45 (16-04-02) / 75 (16-04-03) / 105 (16-04-04)
•
Die Bedienungsanleitung vor dem ersten Gebrauch vollständig lesen und sorgfältig aufbewahren.
•
Please read the instruction manual fully, before using the product. Keep the manual for the entire
life of the product.
MADE IN GERMANY
• Inklusive Fernbedienung
• Inclusive Remote Control
MULTI
COLOUR
LEDs