Seite 3
WALL SPEAKER INSTALL METHODS installationsmethoden Stand (Bracket) Screw (Ф 3.0 x 30mm) Screw (Ф 3.0 x 10mm) Wall Plug Ständer (Halterung) Schraube (Ф 3.0 x 30mm) Schraube (Ф 3.0 x 10mm) Dübel Wall Speaker Install Guide Wandlautsprecher Installationsanleitung...
Seite 4
‣ HOW TO INSTALL WALL SPEAKER installation des wandlautsprechers Before mounting Wall Speaker on the wall, please plug in all cables connected tightly. Please refer to below installation guide. Bevor Sie den Wandlautsprecher an der Wand montieren, schlie- ßen Sie bitte alle Kabel fest an. Bitte beachten Sie die Installations- anleitung.
Seite 5
Please make holes for screws on wall by using a drill. Bohren Sie Löcher in die Wand und setzen Sie die Dübel ein. SCREW hohle Bohrung Please fix the screw and wall plugs enclosed tightly on wall. Fixieren Sie die Wandhalterungen mit den Schrauben. Screw (Ф...
Seite 6
Cables must be connected or with cable shoes to the cable lugs. Pay attention to polarity. Die Kabel sind mit den verzinnten Enden direkt oder nach Ancrimpen der Kabelschuhe an das Terminal anzuschrauben. Achten Sie auf die Polung. Please insert the screw to the Wall Speaker & Bracket Hole. Then use the driver to tightly fix.
Seite 7
‣ CAUTION FOR USING achten sie auf folgendes bei der benutzung ‣ Do not place something on Wall Speaker mounted on the wall. Legen Sie keine Gegenstände auf den Wandlautsprecher. ‣ Please fix the Wall Speaker tightly. (Not to be dropped). Fixieren Sie den Wandlautsprecher fest, sodass dieser nicht herunterfallen kann.