Afterwards, lubricate the bore of the stators with about 2-3 g (0.1 oz) grease LU02. There should only be a slight film of lubricant. Note: Do not over lubricate! • Finally, slider should be lubricated according to the chapter 'mounting'. Page 2 / 4 LU02 / LU06 NTI AG / LinMot...
Seite 3
Lubricant for linear motors ** (1000 g) 0150-1955 * LinMot Spray LU06 corresponds to KLÜBERFOOD NH1 4-002 which was developed for the food processing industry. ** LinMot LU02 Lubricant corresponds to KLÜBERSYNTH UH1 14-31 which was developed for the food processing industry.
Danach Statorbohrung mit 2-3 g Fett LU02 einfetten, wobei lediglich ein leichter Fettfilm auf der Innenseite vorhanden sein sollte. Hinweis: Überfettung vermeiden! • Abschliessend Läufer gemäss vorgängigem Abschnitt 'Montage' einfetten. Seite 2 / 4 LU02 / LU06 NTI AG / LinMot...
Gebrauchsanleitung Reinigungsmittel / Schmiermittel Für die Reinigung von LinMot Statoren und Läufern wird das Reinigungsspray LU06 empfohlen. Zur Verbesserung der Gleiteigenschaft zwischen der Chromnickelstahloberfläche des Läufers und dem Kunststoffgleitlager wird das LinMot Fett LU02 vorgeschrieben. Bestellinformationen Artikel Beschreibung Art-Nr. LU06-250 Klüberfood NH1 4-002 Spray*...
Seite 6
ALL LINEAR MOTION FROM A SINGLE SOURCE Europe / Asia Headquarters North / South America Headquarters NTI AG - LinMot & MagSpring LinMot USA Inc. Bodenaeckerstrasse 2 N1922 State Road 120, Unit 1 CH-8957 Spreitenbach Lake Geneva, WI 53147 Switzerland Sales / Administration: +41 56 419 91 91 Sales / Administration: 262.743.2555...