Herunterladen Diese Seite drucken

Werbung

AP124 - Around the World Globe - Page 1 of 2
C
Locate the components:
1)
Remove the TWA plane (A) from the carton, and locate 2 propellers (B). Place one propeller into each "engine" on
the wings of the plane. Optional: glue propellers to secure.
2)
Remove the Winnie Mae (C), China Clipper (D), and spool of string from the carton, and set aside.
3)
Before removing the wire bar (E) with string and hooks, first remove the cardboard insert from the carton.
Carefully slide the wire out one end of the insert to keep from bending the wire out of shape.
4)
Remove the globe (F) from the box and remove the protective plastic from the globe.
To assemble the mobile:
There are 4 strings hanging from the wire bar (E): One on each end which are glued in place, and 2 in the middle which
are tied together and can slide on the wire bar.
1)
Connect the Winnie Mae (C) and the China Clipper (D) to the strings on either end of the wire bar (E).
2)
Slide the two strings in the middle of the wire bar toward the China Clipper (D) until it is approx. 8.25"
(21cm) from end of the wire bar (see picture).
3)
Of those 2 strings, one is longer than the other. The globe (F) should be connected to the longer string.
When properly assembled the China Clipper (D) is closer to the globe (F) than the Winnie Mae (C). But the China
Clipper should not be touching or bumping the globe.
4)
The shorter string connects to the bottom of the TWA plane (A).
5)
It may be necessary to slide the strings for the Globe (F) and TWA Plane (A) on the wire bar (E) to the left
or right slightly, to balance the Winnie Mae (C) and China Clipper (D).
Optional: Using a strong glue which will dry clear, secure the string which is connected to the Globe (F) and TWA
Plane (A) to the wire bar (E) with a small amount of glue. This should prevent the Winnie Mae and China Clipper from
becoming unbalanced.
To hang your finished mobile:
Included is a spool of string with one hook on the end. Use this to hang the mobile by connecting the hook on the end of
the string to the loop on the top of the TWA plane (A).
A
B
approx. 8.25" (21cm)
E
F
A - TWA Plane
B - 2 Propellers
C - Winnie Mae
D - China Clipper (Pan American Airways)
E - Wire bar with string and hooks
F - Globe
Spool of string with hook (not shown)
D
The Netherlands
AM NL
Ambachtsweg 37
NL-3899 AM
Zeewolde
United States
AM USA
888 Garfield
P.O. Box 21710
Eugene, OR 97402

Werbung

loading

Inhaltszusammenfassung für Authentic Models AP124

  • Seite 1 AP124 - Around the World Globe - Page 1 of 2 A - TWA Plane B - 2 Propellers C - Winnie Mae D - China Clipper (Pan American Airways) E - Wire bar with string and hooks F - Globe Spool of string with hook (not shown) approx.
  • Seite 2 WO111 AP124 - Around the World Globe - Page 2 of 2 A - Avion TWA A - TWA Flugzeug B - 2 Hélices B - 2 Propeller C - Winnie Mae C - Winnie Mae D - China Clipper (Pan American Airways) D - China Clipper (Pan American Airways) E - Tringle de suspension avec fil et crochets...

Diese Anleitung auch für:

Around the world globe