Werbung
Quicklinks
11-03-11 Issue 1
Power Tower
190CAMPT
Base Seal
Nylon Shoulder Washers
4x
x1
Nylon
Shoulder Washers
x1
190CAMPT-T
Optional Seal
Hole Saw
ø50-52mm (2")
Power drill
ø8.5mm (21/64")
Drill Bit
M8 Fasteners
- M8 x 25mm+
- 8mm Plain Washer
(64015)
Base Seal
(190CAMPT)
ø8.5mm (21/64")
4x
ø50mm (2")
x4
x1
M8
Fasteners
x4
Installation Instructions
CAM-PT-150/300
Optional Seal
(190CAMPT-T)
85mm (3.35")
INSTALLATION SOLUTIONS FOR MARINE ELECTRONICS
®
Werbung
Inhaltszusammenfassung für Scanstrut CAM-PT-150
- Seite 1 Installation Instructions 11-03-11 Issue 1 CAM-PT-150/300 Nylon Power Tower Shoulder Washers 190CAMPT 190CAMPT-T Base Seal Optional Seal Hole Saw ø50-52mm (2”) Power drill Optional Seal ø8.5mm (21/64”) (190CAMPT-T) Drill Bit M8 Fasteners Fasteners - M8 x 25mm+ - 8mm Plain Washer...
- Seite 2 IMPORTANT Power Towers are only compatible with marine electronics devices as stated in the latest Scanstrut Product Guide – subject to change without prior notice. Use of the Power Towers with unapproved products, or overloading, invalidates any product warranty. Scanstrut does not supply fastenings to fix this product to the chosen surface. Please choose suitable fastenings for this purpose.