Beatfoxx DB-75BT Discoboy Bedienungsanleitung

DB-75BT Discoboy
LED Bluetooth Speaker
ArtNr 00044048
Please read these instructions carefully
before using the device and retain for
future reference
Important Safety Instructions
Keep the unit away from heat sources, direct
sunlight, humidity, water and any other liquids. Do
not operate the unit if it has been exposed to water,
moisture or any other liquids to prevent against
electric shock, explosion and/or injury to yourself
and damage to the unit.
Do not use the unit if it has been dropped or
damaged in any way. Repairs to electrical equipment
should only be performed by qualified staff
(electricians). Improper repairs may place the user at
serious risk.
Do not use the unit with wet hands. Do not put
objects into any of the openings. Keep the unit free
from dust, lint etc. Do not use this unit for anything
other than its intended use. Keep the unit out of
reach of small children. This product is not a toy. Do
not use chemical cleaning solvents to clean. Do not
open the device. For cleaning only use soft and dry
cloth.
Getting Started
Unpack the Bluetooth speaker & accessories.
Remove all packaging from the Bluetooth speaker.
Check if the box and accessories is not damaged.
In the Box
Bluetooth Mini Disco Light Speaker
Instruction manual
2-in-1 Mini USB charging/audio cable
Operation
(1) Power On/off
(2) Indicator LED light
(3) Mini USB Charging Port
(4) Play / Pause / Mode
(5) Decrease Volume / Previous
Track
(6) Increase Volume / Next Track
(7) LED button
Charging
Power off the device (1), connect the Mini USB
charging port (3) with a USB net adaptor or USB
computer socket. During charging the LED indicator
light (2) will show red light. When the device is fully
charged, the LED turns off. Charging will take 2-3 hrs.
After charging disconnect the loading cable.
Controls and operation
Press Pause/Play button (4) to control music
playback. Long press volume up button (6) to
increase the volume, volume down button (5) to
decrease the volume.
Short press the volume up button (6) to play next
track, short press the volume down button (5) to
play previous track.
Bluetooth pairing
Switch the power switch (1) to "ON" position, the
speaker will light up and starts to rotate. After the
speaker signals a tone the device is ready in
searching/pairing/reconnect mode. For first time
pairing switch on Bluetooth function on your smart
phone or Bluetooth player. Scan for Bluetooth
devices. Connect with "DB-75BT" device. The device
will confirm connection with a signal tone.
After power off/on the device will send a signal tone
and the speaker will reconnect automatically if your
mobile phone has been paired previously. The device
will confirm connection with a signal tone.
Note: Depending on your Bluetooth devices type and
configuration, manual reconnection may
required.
With the play and volume controls (4), (5) and (6)
you can control the playback. Or you can use the
control functions on your Bluetooth device.
With power on/off switch (1) you can switch off the
device after use. This will safe battery energy.
Operation Modes
With mode button (4) you can navigate through
different speaker modes by press & hold.
(Aux-In Bluetooth FM Radio)
AUX-IN Function
With the speaker powered on, connect the Mini USB
connector with the included 2-in-1 cable into the
speaker's port (3) and plug the other end 3.5mm
plug into your devices auxiliary output port.
Press and hold mode button (4) twice to switch to
AUX-IN Mode.
Disconnect the Auxiliary cable when finished. Note:
If there is no sound while auxiliary cable is
connected to Bluetooth device, ensure all other
Bluetooth devices are not paired and repeat step
one. If the problem persists, replace the auxiliary
cable.
FM Radio Mode
Before selecting FM Radio mode, connect the Mini
USB connector (3) with 2-in-1 cable. The cable will
act as antenna to receive the radio stations.
With the speaker powered on, press and hold the
play/pause button (4) for 2 seconds to enter into FM
radio mode. Short press play/pause button (4) again
to automatically navigate through FM channels.
With next track (6) & previous track (5) buttons you
can seek the FM channels manually.
To exit FM radio mode press and hold the
play/pause button (4) for 2 seconds to return to
Bluetooth or AUX-IN mode.
LED Function
Turn on the speaker and the LED effect will light up
and start to rotate. The lighting and rotating can be
turned on and off by press the LED button (7).
Please Note
Not all mobile phones support all the functions listed
above. Please refer to your mobile phones user
manual for further information.
be
Certain functions and indication tones may vary
depending on your mobile phone. When the volume
is adjusted to maximum, you will hear an indication
tone.
Bluetooth specification Bluetooth V2.1/EDR
BT operating distance 10m (max.)
Frequency 150Hz-20KHz
Speaker power 3W
Rechargeable Lithium Battery 400mAh
Charging Time approx. 2 hrs
Playing Time approx. 1.5 hrs
Musikhaus Kirstein GmbH
Bernbeurenerstrasse 11
86956 Schongau/Germany
www.kirstein.de
CE conformity
The CE-marking which is made on your product
and/or packing resp. user manual confirms the
compliance of the product with all for this item
related harmonized EC directives. You can download
the EC declaration of conformity for this item under
download link below:
Http://www.kirstein.de/docs/Konformitaetserklaer
ung/CE_Konformitaetserklaerung_000xxxxx.pdf
Please replace the placeholder „xxxxx" by the last 5
digits of the product article number.