Montageanleitung Einbau von oben - Einbaubecken mit Hahnloch
Installation instructions from above - Built-in basins with tap hole
EB.K450H
EB.R800H
EB.O600H
EB.Q450H
EB.RE700H.1
EB.KF800H
EB.S450H
Entfällt bei/ Not applicable for
EB.R800H, EB.RE700H.1, EB.RE700H.2
3
EB.K400H
EB.R585H
EB.O500H
EB.Q325H
EB.RE700H.2
EB.KF400H
Nur für Becken
mit Überlauf.
Only for basins
with overflow.
1
Oben/ Top side
2
ED.K400H
ED.O500H
ED.S450H
1. Für Becken-Ausschnitt beiliegende
Schablone verwenden. Das
Ausschnittsmaß steht auch unter
www.alape.com zum Download bereit.
Use the template provided for the cut-
out of the basin. Cut-out dimensions are
also available for download at
www.alape.com.
2. Ventil, ggf. Überlauf (optional
Überlaufgarnitur ÜG.1 bei Modell EB.R800H)
und Klammern am Einbaubecken montieren.
Armarturenmonatge auf Becken:
Verwendung der Hahnloch- Unterlegscheibe
(1) ist zwingend erforderlich!
Please mount drain valve, overflow
(optional overflow ÜG.1 to model EB.R800H)
and the fixing clips on the built-in basin.
Mounting of the fitting:
Use the tap hole washer (1) is compulsory!
. Kleber umlaufend, abdichtend auf-
3
tragen (Dosierspitze um 3
Zur Beschleunigung der Aushärtzeit
Kleber mit Wasser besprühen. Styropor-
ring einlegen und andrücken.
Apply adhesive circumferentially,
sealing upwards (shorten cartridge
adapter by approx. 30 mm). Spraying with
water accelerates the hardening process.
Insert polystyrene ring and press on.
RB.K550H
RB.K475H
RB.K425H
mm kürzen).
0
951380/090304