Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Verfügbare Sprachen

Gesamtbedienungsanleitung
Für
LMP_30*1150 EPN
Material Nr.
322-00667
Generiert am
12.07.2023
Enthält Originalbedienungsanleitung
Dokumentationsabschnitte
Montageanleitung de/en Montage, Magnetostriktion - linear Encod
Betriebsanleitung
de/en L_46(K);LM_I46;LMP30;LMRB27 PB 3/30 Magn
Technische Info
de/en Zubehör/Leitung: Ethernet/M8-Versorgung
Konformitätserklärung de/en EU-Konformitätserklärung ELA (EMV+RoHS)
Konformitätserklärung de/en UKCA, Konformitätserkl. ELA (EMV+RoHS)
Technische Daten
Seite 1/1
TR-ELA-BA-DGB-0004-16.pdf
TR-ELA-BA-DGB-0012-11.pdf
TR-E-TI-DGB-0217-01_Zubehoer-Leitungen-E
TR-ELA-KE-DGB-0079-02.pdf
TR-ELA-KE-GB-0080-02.pdf
Änderungen vorbehalten.
TR-Electronic GmbH
Eglishalde 6
78647 Trossingen
Tel. +49 (0) 7425 228-0
info@tr-electronic.de
www.tr-electronic.de

Kapitel

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für TR-Electronic LMP-30 1150 EPN

  • Seite 1 L_46(K);LM_I46;LMP30;LMRB27 PB 3/30 Magn TR-ELA-BA-DGB-0012-11.pdf Technische Info de/en Zubehör/Leitung: Ethernet/M8-Versorgung TR-E-TI-DGB-0217-01_Zubehoer-Leitungen-E Konformitätserklärung de/en EU-Konformitätserklärung ELA (EMV+RoHS) TR-ELA-KE-DGB-0079-02.pdf Konformitätserklärung de/en UKCA, Konformitätserkl. ELA (EMV+RoHS) TR-ELA-KE-GB-0080-02.pdf Technische Daten Änderungen vorbehalten. TR-Electronic GmbH Eglishalde 6 78647 Trossingen Tel. +49 (0) 7425 228-0 Seite 1/1 info@tr-electronic.de www.tr-electronic.de...
  • Seite 2 Seite 2 - 26 Page 27 - 51 Linear Encoder magnetostriktiv _Grundlegende Sicherheitshinweise _Verwendungszweck _Allgemeine Funktionsbeschreibung _Montagehinweise Montageanleitung...
  • Seite 3 Courier-Schrift zeigt Text an, der auf dem Display bzw. Bildschirm sichtbar ist und Menüauswahlen von Software.  < >  weist auf Tasten der Tastatur Ihres Computers hin (wie etwa <RETURN>).  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany Page 2 of 51 TR-ELA-BA-DGB-0004 v16...
  • Seite 4: Inhaltsverzeichnis

    5.4 Erforderliches Anzugsdrehmoment ..................23 5.4.1 Berechnungsbeispiel Axialabdichtung ..............23 5.4.2 Berechnungsbeispiel Radialabdichtung ..............24 6 Zubehör ............................25  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany 03/17/2021 TR-ELA-BA-DGB-0004 v16 Page 3 of 51...
  • Seite 5 LMR-70 und Hinweise für mehrfach redundante Mess-Systeme ergänzt 15.07.2019 Kap. „Mechanik Profil-Gehäuseausführung“, Magnetabstand: 18.03.2020 allgemeingültiges Bild eingefügt Montagehinweis Rohr-Gehäuseausführung 30.11.2020 Magnet T2-S5520 durch T2-S5520N ersetzen 17.03.2021  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany Page 4 of 51 TR-ELA-BA-DGB-0004 v16 03/17/2021...
  • Seite 6: Allgemeines

    Normen und Richtlinien entwickelt, konstruiert und gefertigt. Eine entsprechende Konformitätserklärung kann bei der Firma TR-Electronic GmbH angefordert werden. Der Hersteller der Produkte, die TR-Electronic GmbH in D-78647 Trossingen, besitzt ein zertifiziertes Qualitätssicherungssystem gemäß ISO 9001.  TR-Electronic GmbH 2007, All Rights Reserved...
  • Seite 7: Verwendete Abkürzungen Und Begriffe

    Europäische Union Elektro-Magnetische-Verträglichkeit Elektrostatische Entladung (Electro Static Discharge) Internationale Elektrotechnische Kommission National Electrical Code Verband der Elektrotechnik, Elektronik und Informationstechnik  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany Page 6 of 51 TR-ELA-BA-DGB-0004 v16 03/17/2021...
  • Seite 8: Allgemeine Funktionsbeschreibung

    Positionssensor (Magnet) ❺ Magnetfeld, erzeugt durch einen Stromimpuls ❻ Resultierendes Magnetfeld am Positionssensor ❼ Antwortsignal des Torsionsimpulses ❽ Messwertaufnehmer Empfangsspule  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany 03/17/2021 TR-ELA-BA-DGB-0004 v16 Page 7 of 51...
  • Seite 9: Grundlegende Sicherheitshinweise

    Anlage/Maschine in die das Mess-System eingebaut werden soll, den Bestimmungen der EU-EMV-Richtlinie, den harmonisierten Normen, Europanormen oder den entsprechenden nationalen Normen entspricht.  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany Page 8 of 51...
  • Seite 10: Allgemeine Gefahren Bei Der Verwendung Des Produkts

    Das Mess-System ist vom Betreiber zwingend mit in das eigene Sicherheitskonzept einzubinden.  Insbesondere ist folgende Verwendung untersagt: In Umgebungen mit explosiver Atmosphäre zu medizinischen Zwecken  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany 03/17/2021 TR-ELA-BA-DGB-0004 v16 Page 9 of 51...
  • Seite 11: Gewährleistung Und Haftung

    Dokumentationen ausdrücklich beschriebenen, vornehmen.  Reparaturen dürfen nur vom Hersteller, oder einer vom Hersteller autorisierten Stelle bzw. Person vorgenommen werden.  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany Page 10 of 51 TR-ELA-BA-DGB-0004 v16...
  • Seite 12: Personalauswahl Und -Qualifikation; Grundsätzliche Pflichten

    VDE-Verlag GmbH).  Klare Regelung Verantwortlichkeiten für Montage, Installation, Inbetriebnahme und Bedienung festlegen. Beaufsichtigungspflicht bei zu schulendem oder anzulernendem Personal!  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany 03/17/2021 TR-ELA-BA-DGB-0004 v16 Page 11 of 51...
  • Seite 13: Sicherheitstechnische Hinweise

    Entsorgung Muss nach der Lebensdauer des Gerätes eine Entsorgung vorgenommen werden, sind die jeweils geltenden landesspezifischen Vorschriften zu beachten.  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany Page 12 of 51 TR-ELA-BA-DGB-0004 v16 03/17/2021...
  • Seite 14: Transport / Lagerung

    Nur Original Verpackung verwenden! Unsachgemäßes Verpackungsmaterial kann beim Transport Schäden am Gerät verursachen. Lagerung Lagertemperatur: siehe Produktdatenblatt Trocken lagern  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany 03/17/2021 TR-ELA-BA-DGB-0004 v16 Page 13 of 51...
  • Seite 15: Montagehinweise / Schema

    LMP-Systeme Magnet: Artikel-Nr.: Magnetabstand: T1-S5520 49-155-009 X = 3 T2-S5520N 49-155-032 X = 8 T1-S3818 49-155-015 X = 3  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany Page 14 of 51 TR-ELA-BA-DGB-0004 v16 03/17/2021...
  • Seite 16 Umfang des Positionssensors vorgesehen werden. Der Abstandshalter ist zwischen dem Positionssensor und dessen Befestigung zu montieren. Die Befestigungsschrauben müssen aus nicht magnetisierbarem Werkstoff sein.  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany 03/17/2021...
  • Seite 17: Montageschema Der Rohr-Gehäuseausführung

    Die in den Produktdatenblättern angegebenen Maximalwerte für Vibration und Schock werden nur erreicht, wenn das Mess-System beidseitig fest montiert bzw. dämpfend gelagert ist, nicht „frei schwingend“.  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany Page 16 of 51...
  • Seite 18: Einbau In Hydraulikzylinder

    LMR-70 Radialdichtung Hydraulikzylinder montierbar Beim Einbau der Linear-Mess-Systeme in die Hydraulikzylinder müssen die gerätespezifischen Daten und Spezifikationen berücksichtigt werden.  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany 03/17/2021 TR-ELA-BA-DGB-0004 v16 Page 17 of 51...
  • Seite 19: Abdichtungsvarianten

    O-Ring / 23.47x2.62 LA-66 nicht angegebene Maße sind aus der kundenspezifischen Zeichnung zu entnehmen!  Bohrungen 4 tief (8x45°)  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany Page 18 of 51 TR-ELA-BA-DGB-0004 v16 03/17/2021...
  • Seite 20: Radialabdichtung

    5.1.2 Radialabdichtung LA-41 / LA-46 / LMRI-46 / LMR-70 nicht angegebene Maße sind aus der kundenspezifischen Zeichnung zu entnehmen! kundenseitige Anforderung, Gewindeaufnahme M18x1.5  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany 03/17/2021 TR-ELA-BA-DGB-0004 v16...
  • Seite 21: Einbauvarianten Bei Magnetisierbarem Material

    Abdichtung erfolgt Flansch-seitig entweder radial oder axial über einen O-Ring (kein Lieferumfang !). 5.2.1 Einbaubeispiel LA-66 Beispiel LA-66 Hydraulikzylinder Kolbenstange Abstandshalter aus nicht magnetisierbarem Material Magnet (Positionssensor) Mess-System Anschluss-Stecker  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany Page 20 of 51 TR-ELA-BA-DGB-0004 v16 03/17/2021...
  • Seite 22: Einbaubeispiel Lmr-48, Variante Mit M12-Flanschstecker

    Stecker-Hülse eingesteckt werden. Die Hülse mit gestecktem Stecker muss nun mit vier M4 Zylinderkopf-Schrauben an den Hydraulik- zylinder montiert werden.  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany 03/17/2021 TR-ELA-BA-DGB-0004 v16 Page 21 of 51...
  • Seite 23: Besonderheiten

    Das Druckrohr verbleibt daher beim Sensortausch im Hydraulikzylinder. Das Hydrauliksystem bleibt weiterhin unter Druck und langwierige Leer- und Füllzeiten entfallen daher. Beispiel LA-65-H Beispiel LA-46-H  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany Page 22 of 51 TR-ELA-BA-DGB-0004 v16 03/17/2021...
  • Seite 24: Erforderliches Anzugsdrehmoment

    "Maschinenelemente", Roloff/Matek, Tabelle A8-11 (II) aus "Maschinenelemente", Roloff/Matek, Tabelle A8-9 (III) aus "Maschinenelemente", Roloff/Matek, Tabelle A8-12a (IV) aus "Maschinenelemente", Roloff/Matek, Gleichung 8.20  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany 03/17/2021 TR-ELA-BA-DGB-0004 v16 Page 23 of 51...
  • Seite 25: Berechnungsbeispiel Radialabdichtung

    "Maschinenelemente", Roloff/Matek, Tabelle A8-11 (II) aus "Maschinenelemente", Roloff/Matek, Tabelle A8-9 (III) aus "Maschinenelemente", Roloff/Matek, Tabelle A8-12a (IV) aus "Maschinenelemente", Roloff/Matek, Gleichung 8.20  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany Page 24 of 51 TR-ELA-BA-DGB-0004 v16 03/17/2021...
  • Seite 26: Zubehör

    6 Zubehör www.tr-electronic.de/produkte/lineargeber/zubehoer.html  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany 03/17/2021 TR-ELA-BA-DGB-0004 v16 Page 25 of 51...
  • Seite 27 Zubehör  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany Page 26 of 51 TR-ELA-BA-DGB-0004 v16 03/17/2021...
  • Seite 28 Linear Encoder magnetostrictive _Basic safety instructions _Intended use Assembly _General functional description Instructions _Instructions for mounting  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany 03/17/2021 TR-ELA-BA-DGB-0004 v16 Page 27 of 51...
  • Seite 29 Courier font displays text, which is visible on the display or screen and software menu selections.  < >  indicates keys on your computer keyboard (such as <RETURN>).  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany Page 28 of 51 TR-ELA-BA-DGB-0004 v16...
  • Seite 30 5.4 Required torque ........................49 5.4.1 Calculation example axial sealing ................49 5.4.2 Calculation example radial sealing ................. 50 6 Accessories ............................. 51  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany 03/17/2021 TR-ELA-BA-DGB-0004 v16...
  • Seite 31: Revision Index

    Chapter “Mechanics profile- housing design”, Magnet distance: 03/18/2020 Universal image inserted Instructions for mounting, rod housing design 11/30/2020 Magnet T2-S5520 replaced with T2-S5520N 03/17/2021  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany Page 30 of 51 TR-ELA-BA-DGB-0004 v16 03/17/2021...
  • Seite 32: General Information

    The measuring systems have been developed, designed and manufactured under observation of the applicable international and European standards and directives. A corresponding declaration of conformity can be requested from TR-Electronic GmbH. The manufacturer of the product, TR-Electronic GmbH in D-78647 Trossingen, operates a certified quality assurance system in accordance with ISO 9001.
  • Seite 33: Abbreviations And Definitions

    Electro Magnetic Compatibility Electro Static Discharge International Electrotechnical Commission National Electrical Code Association for Electrical, Electronic & Information Technologies  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany Page 32 of 51 TR-ELA-BA-DGB-0004 v16 03/17/2021...
  • Seite 34: General Functional Description

    Resulting magnetic field at the position sensor ❼ Answer signal of the torsion impulse ❽ Measuring sensor Receipt coil  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany 03/17/2021 TR-ELA-BA-DGB-0004 v16 Page 33 of 51...
  • Seite 35: Basic Safety Instructions

    EU EMC Directive, the harmonized standards, European standards or the corresponding national standards.  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany Page 34 of 51...
  • Seite 36: General Risks When Using The Product

     The following area of use is especially forbidden: In environments where there is an explosive atmosphere for medical purposes  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany 03/17/2021 TR-ELA-BA-DGB-0004 v16 Page 35 of 51...
  • Seite 37: Warranty And Liability

    2.6 Warranty and liability The General Terms and Conditions ("Allgemeine Geschäftsbedingungen") of TR-Electronic GmbH always apply. These are available to the operator with the Order Confirmation or when the contract is concluded at the latest. Warranty and liability claims in the case of personal injury or damage to property are excluded if they result from one or more of the following causes: ...
  • Seite 38: Personnel Qualification; Obligations

    Verlag GmbH).  Define clear rules of responsibilities for the assembly, installation, start-up and operation. The obligation exists to provide supervision for trainee personnel !  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany 03/17/2021...
  • Seite 39: Safety Informations

    If disposal has to be undertaken after the life span of the device, the respective applicable country-specific regulations are to be observed.  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany Page 38 of 51...
  • Seite 40: Transportation / Storage

    The wrong packaging material can cause damage to the device during transportation. Storage Storage temperature: see product data sheet Store in a dry place  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany 03/17/2021 TR-ELA-BA-DGB-0004 v16 Page 39 of 51...
  • Seite 41: Instructions For Mounting / Schematic

    Magnet: Art.-No.: Magnet distance: T1-S5520 49-155-009 X = 3 T2-S5520N 49-155-032 X = 8 T1-S3818 49-155-015 X = 3  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany Page 40 of 51 TR-ELA-BA-DGB-0004 v16 03/17/2021...
  • Seite 42 The spacer is to be installed between the position sensor and its attachment. The screws must be from not magnetizable material.  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany...
  • Seite 43: Assembly Diagram Of The Rod Housing Design

    The maximum values for Vibration and Shock specified in the product data sheets are only achieved if the measuring system is firmly mounted or damped on both sides. Not "freely vibrating".  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany Page 42 of 51...
  • Seite 44: Installation In Hydraulic Cylinders

    At the installation of the measuring system into the hydraulic cylinders the device specific data and specifications must be taken into account.  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany 03/17/2021 TR-ELA-BA-DGB-0004 v16...
  • Seite 45: Sealing Options

    Steel Tube O-Ring / 23.47x2.62 LA-66 not specified dimensions see customized drawing!  Borehole 4 deep (8x45°) Steel Tube  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany Page 44 of 51 TR-ELA-BA-DGB-0004 v16 03/17/2021...
  • Seite 46: Radial Sealing

    5.1.2 Radial sealing LA-41 / LA-46 / LMRI-46 / LMR-70 not specified dimensions see customized drawing! User requirements, thread M18x1.5 (mating part)  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany 03/17/2021 TR-ELA-BA-DGB-0004 v16 Page 45 of 51...
  • Seite 47: Installation Types With Magnetizable Material

    Example LA-66 Hydraulic cylinder Piston rod Spacer, consisting of not magnetizable material Magnet (Position sensor) Measuring system Connector plug  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany Page 46 of 51 TR-ELA-BA-DGB-0004 v16 03/17/2021...
  • Seite 48: Mounting Example Lmr-48, Version With M12-Male Connector

    The plug holder with the connected plug must be mounted now with four M4 cylinder head screws to the hydraulic cylinder.  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany 03/17/2021 TR-ELA-BA-DGB-0004 v16...
  • Seite 49: Unusual Features

    Furthermore the hydraulics system remains under pressure and long emptying times or filling times are therefore dropped. Example LA-65-H Example LA-46-H  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany Page 48 of 51 TR-ELA-BA-DGB-0004 v16...
  • Seite 50: Required Torque

    "Maschinenelemente" (Machine elements), Roloff/Matek, table A8-9 (III) see "Maschinenelemente" (Machine elements), Roloff/Matek, table A8-12a (IV) see "Maschinenelemente" (Machine elements), Roloff/Matek, equation 8.20 "oiled easily"  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany 03/17/2021 TR-ELA-BA-DGB-0004 v16 Page 49 of 51...
  • Seite 51: Calculation Example Radial Sealing

    "Maschinenelemente" (Machine elements), Roloff/Matek, table A8-9 (III) see "Maschinenelemente" (Machine elements), Roloff/Matek, table A8-12a (IV) see "Maschinenelemente" (Machine elements), Roloff/Matek, equation 8.20 "oiled easily"  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany Page 50 of 51 TR-ELA-BA-DGB-0004 v16 03/17/2021...
  • Seite 52: Accessories

    6 Accessories www.tr-electronic.com/products/linear-encoders/accessories.html  TR-Electronic GmbH 2007, All Rights Reserved Printed in the Federal Republic of Germany 03/17/2021 TR-ELA-BA-DGB-0004 v16 Page 51 of 51...
  • Seite 53 Seite 2 - 52 Page 53 - 103 +Multi sensor Absolut linear Encoder magnetostriktiv LA-46-K / LP-46-K / LMRI-46 LMPI-46 LA-46 LP-46 LMP-30 LMRB-27 _Zusätzliche Sicherheitshinweise _Installation _Inbetriebnahme _Konfiguration / Parametrierung _Störungsbeseitigung und Diagnosemöglichkeiten Benutzerhandbuch Schnittstelle 3M: 5832; 5844 30M: 5838; 5852...
  • Seite 54 PROFIBUS-DP und das PROFIBUS-Logo sind eingetragene Warenzeichen der Profibus Nutzerorganisation e.V. (PNO) SIMATIC ist ein eingetragenes Warenzeichen der SIEMENS AG.  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 2 of 103 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 55 6.9 TR-Modes 2–20 Magnets + Speed ..................30 6.10 Preset-Justage-Funktion ....................... 32 6.10.1 Wirkungsweise Preset / interner Positions-Offset ..........34  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 56 7.2.2.17 Seriennummer ......................... 50 7.2.2.18 Herstellerspezifische Diagnosen ..................... 51 7.3 Sonstige Störungen ........................ 51  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 4 of 103 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 57: Änderungs-Index

    LMRB-27 hinzugefügt 10.03.17 LMRB-27 Warnhinweis ergänzt 16.03.18 LMRB-27 Warnhinweis entfernt 07.06.18  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11 Page 5 of 103...
  • Seite 58: Allgemeines

    Es gelten somit zusammen folgende Dokumentationen:  siehe Kapitel „Mitgeltende Dokumente“ in der Montageanleitung www.tr-electronic.de/f/TR-ELA-BA-DGB-0004  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 6 of 103 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 59: Verwendete Abkürzungen / Begriffe

    Dezentralized Periphery (Dezentrale Peripherie) Elektro-Magnetische-Verträglichkeit Geräte-Stammdaten-Datei PROFIBUS Nutzerorganisation e.V. PROFIBUS herstellerunabhängiger, offener Feldbusstandard  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11 Page 7 of 103...
  • Seite 60: Zusätzliche Sicherheitshinweise

    Beachten der Montageanleitung, insbesondere das dort enthaltene Kapitel "Grundlegende Sicherheitshinweise" muss vor Arbeitsbeginn gelesen und verstanden worden sein  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 8 of 103 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 61: Profibus Informationen

    Datenaustausch in der Feldebene konzipiert ist. Die Grundfunktionalität wird durch die Leistungsstufe V0 festgelegt. Dazu gehören der zyklische Datenaustausch sowie die stations-, modul- und kanalspezifische Diagnose.  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018...
  • Seite 62: Installation / Inbetriebnahmevorbereitung

    Richtlinien und sonstige einschlägige Normen und Richtlinien zu beachten! Insbesondere sind die EMV-Richtlinie sowie die Schirmungs- und Erdungsrichtlinien in den jeweils gültigen Fassungen zu beachten!  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 10 of 103...
  • Seite 63: Bus-Terminierung

    Stationsadresse läuft das Gerät nicht an. Die Zuordnung der Schalter ist der Steckerbelegung zu entnehmen.  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 64: Schirmauflage, Ausführung Mit Kabelabgang

    6. Dichteinsatz / Kontakthülse (2) + (3) in Einschraubstutzen (5) bündig zusammen stecken. 7. Überwurfmutter (1) mit Einschraubstutzen (5) verschrauben.  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 12 of 103 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 65 Einschraubstutzen vorgesehenen Längsnuten passen. 7. Überwurfmutter (1) mit Einschraubstutzen (4) verschrauben.  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11 Page 13 of 103...
  • Seite 66: Anschluss - Hinweise

    (www.tr-electronic.de/service/downloads/steckerbelegungen.html). Die Steckerbelegungsnummer ist auf dem Typenschild des Mess-Systems vermerkt.  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 14 of 103 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 67: Inbetriebnahme

    Projektierungsfehlern erreicht. Das Mess-System hat die PNO-Identnummer AAAC (Hex). Diese Nummer ist reserviert und bei der PNO hinterlegt.  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 68: Anlauf Am Profibus

    WCFG = Wait Configuration DXCHG = Data Exchange Abbildung 2: DP-Slave Initialisierung  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 16 of 103 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 69: Bus-Statusanzeige

    Mess-System befindet sich im Data Exchange und hat keinen Magneten erkannt. Entsprechende Maßnahmen im Fehlerfall siehe Kapitel „Störungsbeseitigung und Diagnosemöglichkeiten“, Seite 43.  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 70: Parametrierung Und Konfiguration

    0 = Konsistenz über ein Byte oder Wort Konsistenz: 1 = Konsistenz über das ganze Modul  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 18 of 103 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 71: Übersicht

    Einstellungsmöglichkeiten für Geschwindigkeit aus Sicht des Bus-Masters X = Anzahl der Magnete – 1, 1…29 bei den TR-Modes, 1…19 bei den TR-Modes + Speed  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 72 - Geschwindigkeitsausgabe Einstellungsmöglichkeiten für Geschwindigkeit X = Anzahl der Magnete – 1, 1…29 bei den TR-Modes, 1…19 bei den TR-Modes + Speed  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 20 of 103...
  • Seite 73: Pno Class 1 16-Bit

    0: steigende Werte Code sequence Unsigned8 Bit 0 1: fallende Werte  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11 Page 21 of 103...
  • Seite 74: Pno Class 2 16-Bit

    Total measuring Gesamtmesslänge in Schritten Unsigned16 1000 range  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 22 of 103 TR - ELA - BA - DGB - 0012 - 11 06/07/2018...
  • Seite 75: Pno Class 2 32-Bit

    Total measuring Gesamtmesslänge in Schritten Unsigned32 10 000 range  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11 Page 23 of 103...
  • Seite 76 Preset-Justagewert für adressierten Magneten Preset-Justagewert für adressierten Magneten Preset-Justagewert für adressierten Magneten  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 24 of 103 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 77 Unsigned8 0: Kein Status Status Bit 2 1: Mit Status  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11 Page 25 of 103...
  • Seite 78 Preset-Justagewert für adressierten Magneten Preset-Justagewert für adressierten Magneten Z = Anzahl der Magnete – 1, 1…29  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 26 of 103 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 79 Unsigned8 0: Kein Status Status Bit 2 1: Mit Status  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11 Page 27 of 103...
  • Seite 80: Tr-Mode 1 Magnet + Speed

    Preset-Justagewert für adressierten Magneten Preset-Justagewert für adressierten Magneten Preset-Justagewert für adressierten Magneten  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 28 of 103 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 81 23-24 Unsigned16 Min: - Auflösung Max: 10 000 (1 m/s)  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11 Page 29 of 103...
  • Seite 82: Tr-Modes 2-20 Magnets + Speed

    Preset-Justagewert für adressierten Magneten Preset-Justagewert für adressierten Magneten Z = Anzahl der Magnete – 1, 1…19  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 30 of 103 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 83 23-24 Unsigned16 Min: - Auflösung Max: 10 000 (1 m/s)  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11 Page 31 of 103...
  • Seite 84: Preset-Justage-Funktion

    … … … … … … … … … –  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 32 of 103 TR - ELA - BA - DGB - 0012 - 11 06/07/2018...
  • Seite 85 –8388608: CLASS 2 32 Bit, TR-Modes 32767: CLASS 2 16 Bit Obergrenze +8388607: CLASS 2 32 Bit, TR-Modes  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 86: Wirkungsweise Preset / Interner Positions-Offset

    Parametrierung und Konfiguration 6.10.1 Wirkungsweise Preset / interner Positions-Offset  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 34 of 103 TR - ELA - BA - DGB - 0012 - 11 06/07/2018...
  • Seite 87: Beschreibung Der Betriebsparameter

    Auflösung des Mess-Systems verändert werden. Der ausgegebene Positionswert wird binär dekodiert und mit einer Nullpunktskorrektur und der eingestellten Zählrichtung verrechnet.  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 88: Messlänge In Schritten

    Anzahl der Magnete stimmt nicht mit der betriebenen Anzahl überein – Konfigurationsfehler  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 36 of 103 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 89: Status

    – Complement: Zweierkomplementdarstellung – Signed: Darstellung mit Vorzeichen und Betrag  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11 Page 37 of 103...
  • Seite 90: Geschwindigkeit - Auflösung [0.1Mm/S]

    = 0,1 mm/s 10 = 1,0 mm/s Untergrenze Obergrenze 10 000 Default  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 38 of 103 TR - ELA - BA - DGB - 0012 - 11 06/07/2018...
  • Seite 91: Konfigurationsbeispiel, Simatic

    Dateinamen und Einträge in den nachfolgenden Masken sind nur als Beispiele für die Vorgehensweise zu betrachten. Zur Aufnahme der GSD-Datei in den Katalog, muss diese zuerst installiert werden:  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018...
  • Seite 92 TR-Modes 2-20 magnets+speed, siehe Seite 30 Der Eintrag Universalmodul wird irrtümlicherweise automatisch von manchen Systemen bereitgestellt, darf jedoch nicht verwendet werden!  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 40 of 103 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 93 Netzeinstellungen vorgenommen werden (Klick mit rechter Maustaste auf das Mess- System-Symbol --> Objekteigenschaften):  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 94 Gewünschte Konfiguration aus dem Katalog auf den Steckplatz übertragen (Drag&Drop). Das Mess-System-Symbol muss aktiv sein. Parametrierung vornehmen mit Doppelklick auf die Steckplatznummer:  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 42 of 103...
  • Seite 95: Störungsbeseitigung Und Diagnosemöglichkeiten

    Magnet erkannt. - Sicherstellen, dass die konfigurierte Anzahl Magnete mit der betriebenen Anzahl übereinstimmt.  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 96: Verwendung Der Profibus Diagnose

    Byte 8 gerätespezifische weitere gerätespezifische Diagnose Erweiterungen Byte 241 (max.)  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 44 of 103 TR - ELA - BA - DGB - 0012 - 11 06/07/2018...
  • Seite 97: Stationsstatus 1

    Überlauf bei erweiterter Bit 7 Ext_Diag_Overflow Diagnose Bit 6-0 Reserviert  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11 Page 45 of 103...
  • Seite 98: Masteradresse

    Stehen zusätzliche Diagnoseinformationen zur Verfügung, so trägt der Slave an dieser Stelle die Anzahl der Bytes ein, die außer der Normdiagnose noch folgen.  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 46 of 103...
  • Seite 99: Erweiterte Diagnose

    Bit 6 nicht benutzt Bit 7 nicht benutzt  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11 Page 47 of 103...
  • Seite 100: Betriebsstatus

    Für zusätzliche Alarme ist das Byte 17 reserviert, jedoch sind keine weiteren Alarme implementiert. Erweiterte Diagnose, Byte 17 Bedeutung Bit 0-7 reserviert  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 48 of 103 TR - ELA - BA - DGB - 0012 - 11 06/07/2018...
  • Seite 101: Unterstützte Alarme

    Erweiterte Diagnose, Byte 24-25 Byte 24 Revisions-Nummer Byte 25 Revisions-Index  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11 Page 49 of 103...
  • Seite 102: Software Version

    Erweiterte Diagnose, Byte 48-57 Die Diagnosebytes zeigen Seriennummer des Encoders an. Wird diese Funktion nicht unterstützt, werden Sterne angezeigt (Hex-Code 0x2A) **********.  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 50 of 103...
  • Seite 103: Herstellerspezifische Diagnosen

    Adern für Daten und Versorgung. Die Schirmung und die Leitungsführung müssen nach den Aufbaurichtlinien für PROFIBUS ausgeführt sein.  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 104 Störungsbeseitigung und Diagnosemöglichkeiten  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 52 of 103 TR - ELA - BA - DGB - 0012 - 11 06/07/2018...
  • Seite 105 User Manual _Commissioning Interface _Configuration / Parameterization _Troubleshooting / Diagnostic options  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11 Page 53 of 103...
  • Seite 106 PROFIBUS-DP and the PROFIBUS logo are registered trademarks of the Profibus User Organization (PNO) SIMATIC is a registered trademark of SIEMENS AG.  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 54 of 103...
  • Seite 107 6.9 TR-Modes 2–20 Magnets + Speed ..................82 6.10 Preset adjustment function ....................84 6.10.1 Operating method Preset / internal position offset ..........86  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 108 7.2.2.17 Serial number .......................... 102 7.2.2.18 Manufacturer's diagnoses ....................... 103 7.3 Other faults ..........................103  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 56 of 103 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 109: Revision Index

    LMRB-27 added 03/10/17 LMRB-27 warning added 03/16/18 LMRB-27 warning removed 06/07/18  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11 Page 57 of 103...
  • Seite 110: General Information

     see chapter “Other applicable documents” in the Assembly Instructions www.tr-electronic.com/f/TR-ELA-BA-DGB-0004  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 58 of 103 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 111: Abbreviations Used / Terminology

    Device Master File PROFIBUS User Organization (PROFIBUS Nutzerorganisation) PROFIBUS Manufacturer independent, open field bus standard  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 112: Additional Safety Instructions

    Assembly Instructions, particularly the chapter "Basic Safety Instructions" contained therein, must have been read and understood prior to commencement of work  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 60 of 103...
  • Seite 113: Profibus Information

    The basic functionality is defined by the performance level V0. This includes cyclic data exchange, as well as the station, module and channel-specific diagnosis.  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018...
  • Seite 114: Installation / Preparation For Commissioning

    In particular, the applicable EMC directive and the shielding and grounding guidelines must be observed!  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 62 of 103...
  • Seite 115: Bus Termination

    The device does not start up with an invalid station address. Assignment of the switches, see pinassignment.  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 116: Shield Cover, Version With Cable Outlet

    6. Push seal / contact bush (2) + (3) flush into the screw socket (5). 7. Screw the nut (1) to the screw socket (5).  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 64 of 103...
  • Seite 117 6. Insert the clamping ring (2) in the screw socket (4) such that the torque supports fit in the slots in the screw socket (4). 7. Screw the nut (1) to the screw socket (4).  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018...
  • Seite 118: Connection - Notes

    (www.tr-electronic.com/service/downloads/pin-assignments.html). The connector number is noted on the nameplate of the measuring system.  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 66 of 103...
  • Seite 119: Commissioning

    The measuring system has the PNO ID number AAAC (hex). This number is reserved and is stored at the PNO.  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 120: Starting Up On The Profibus

    WCFG = Wait Configuration DXCHG = Data Exchange Figure 2: DP slave initialization  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 68 of 103 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 121: Bus Status Display

    Measuring system in Data Exchange, but no magnet was detected. Corresponding measures in case of an error see chapter “Troubleshooting and diagnosis options”, page 95.  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018...
  • Seite 122: Parameterization And Configuration

    0 = Consistency about one byte or word Consistency: 1 = Consistency about the complete module  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 70 of 103 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 123: Overview

    Diverse parameters for the speed output from the bus master perspective X = number of magnets – 1, 1…29 at the TR-Modes, 1…19 at the TR-Modes + Speed  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018...
  • Seite 124 Diverse parameters for the speed output X = number of magnets – 1, 1…29 at the TR-Modes, 1…19 at the TR-Modes + Speed  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 72 of 103...
  • Seite 125: Pno Class 1 16-Bit

    0: increasing values Code sequence Unsigned8 Bit 0 1: decreasing values  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11 Page 73 of 103...
  • Seite 126: Pno Class 2 16-Bit

    Total measuring Total measuring length in steps Unsigned16 1000 range  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 74 of 103 TR - ELA - BA - DGB - 0012 - 11 06/07/2018...
  • Seite 127: Pno Class 2 32-Bit

    Total measuring Total measuring length in steps Unsigned32 1000 range  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11 Page 75 of 103...
  • Seite 128 Preset adjustment value, addressed magnet Preset adjustment value, addressed magnet Preset adjustment value, addressed magnet  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 76 of 103 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 129: Status Disabled

    0: Status disabled Ready status Bit 2 1: Status enabled  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11 Page 77 of 103...
  • Seite 130 Preset adjustment value, addressed magnet Preset adjustment value, addressed magnet Z = number of magnets – 1, 1…29  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 78 of 103 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 131 0: Status disabled Ready status Bit 2 1: Status enabled  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11 Page 79 of 103...
  • Seite 132: Tr-Mode 1 Magnet + Speed

    Preset adjustment value, addressed magnet Preset adjustment value, addressed magnet Preset adjustment value, addressed magnet  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 80 of 103 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 133 23-24 Unsigned16 Min: - Resolution Max: 10 000 (1 m/s)  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11 Page 81 of 103...
  • Seite 134: Tr-Modes 2-20 Magnets + Speed

    Preset adjustment value, addressed magnet Preset adjustment value, addressed magnet Z = number of magnets – 1, 1…19  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 82 of 103 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 135 Min: 23-24 Unsigned16 - Resolution Max: 10 000 (1 m/s)  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11 Page 83 of 103...
  • Seite 136: Preset Adjustment Function

    … … … … … … … … … –  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 84 of 103 TR - ELA - BA - DGB - 0012 - 11 06/07/2018...
  • Seite 137 –8388608: CLASS 2 32 Bit, TR-Modes 32767: CLASS 2 16 Bit Upper limit +8388607: CLASS 2 32 Bit, TR-Modes  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 138: Operating Method Preset / Internal Position Offset

    Parameterization and configuration 6.10.1 Operating method Preset / internal position offset  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 86 of 103 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 139: Description Of The Operating Parameters

    The position value output is binary decoded and is calculated with a zero point correction and the code sequence set.  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018...
  • Seite 140: Total Measuring Range

    Configured number of magnets does not agree with the operated number – Configuration error  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 88 of 103 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 141: Ready Status

    Defines the format for the speed output. – Complement: Two's complement – Signed: Sign + value  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11 Page 89 of 103...
  • Seite 142: Velocity - Units [0.1Mm/S]

    10 = 1.0 mm/s Lower limit Upper limit 10 000 Default  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 90 of 103 TR - ELA - BA - DGB - 0012 - 11 06/07/2018...
  • Seite 143: Configuration Example, Simatic

    File names and entries in the following masks are to be regarded only as examples of the procedure. For the GSD file to be transferred to the catalogue, it must first be installed:  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018...
  • Seite 144 TR-Modes 2-20 magnets+speed, see page 82 The entry Universal module is erroneously available for some systems, but must not be used!  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 92 of 103 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 145 Connect measuring system to the master system (drag&drop): Once the measuring system is connected to the master system, the network settings can be undertaken --> Object Properties... --> PROFIBUS... button):  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018...
  • Seite 146 Transfer the required configuration from the catalogue to the slot (drag&drop). The measuring system symbol must be active. Perform parameterization with a double click on the slot number:  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 94 of 103...
  • Seite 147: Troubleshooting And Diagnosis Options

    - Guarantee that the configured number of magnets agrees with the operated number.  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 148: Use Of The Profibus Diagnosis

    8 device-specific further device-specific diagnosis extensions byte 241 (max)  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 96 of 103 TR - ELA - BA - DGB - 0012 - 11 06/07/2018...
  • Seite 149 7 Ext_Diag_Overflow Overrun for extended diagnosis bit 6-0 Reserved  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11 Page 97 of 103...
  • Seite 150: Master Address

    If further diagnosis informations are available, the slave enters the number of bytes at this location, which follow in addition to the standard diagnosis.  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 98 of 103...
  • Seite 151: Extended Diagnosis

    6 not used bit 7 not used  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11 Page 99 of 103...
  • Seite 152: Operating Status

    Byte 17 is reserved for additional alarms, however no further alarms are implemented. Extended diagnosis, byte 17 Significance bit 0-7 reserved  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 100 of 103 TR - ELA - BA - DGB - 0012 - 11 06/07/2018...
  • Seite 153: Alarms Supported

    Extended diagnosis, bytes 24-25 byte 24 Revision number byte 25 Revision index  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11 Page 101 of 103...
  • Seite 154: Software Version

    The diagnosis bytes show the serial number of the encoder. If this function is not supported, asterisks ********** (hex code 0x2A) are displayed.  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany Page 102 of 103...
  • Seite 155: Manufacturer's Diagnoses

    Shielding and wire routing must be performed according to the PROFIBUS construction guidelines.  TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany 06/07/2018 TR - ELA - BA - DGB - 0012 - 11...
  • Seite 156: Vorkonfektionierte Leitungen

    02 m 680-00057 05 m 680-00058 Kabeldose M8, 4-polig, gerade mit offenem Kabelende (ungeschirmt) 10 m 680-00059 15 m 680-00060 02 m 680-00061 05 m 680-00062 Kabeldose M8, 4-polig, gerade mit offenem Kabelende (geschirmt) 10 m 680-00063 15 m 680-00064 www.tr-electronic.de...
  • Seite 157: Product Information

    680-00058 Female connector M8, 4-pole, straight with open cable end (unshielded) 10 m 680-00059 15 m 680-00060 02 m 680-00061 05 m 680-00062 Female connector M8, 4-pole, straight with open cable end (shielded) 10 m 680-00063 15 m 680-00064 www.tr-electronic.com...
  • Seite 158: Eu-Konformitätserklärung / Eu Declaration Of Conformity

    Elektro- und Elektronikgeräten (RoHS) 2011/65/EU (L 174/88) Restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) in alleiniger Verantwortung von / under the sole responsibility of: TR-Electronic GmbH Eglishalde 6 D - 78647 Trossingen Tel.: 07425/228-0...
  • Seite 159 Gültigkeitsliste / List of validity Baureihe / Series: LMRB 27 Order No.: 341-xxxxx, 343-xxxxx Type: LMRB-27 Baureihe / Series: LMP 30 Order No.: 322-xxxxx Type: LMP-30 Baureihe / Series: LMRS 34 Order No.: 344-xxxxx Type: LMRS-34 Baureihe / Series: LMPS 34 Order No.: 345-xxxxx Type: LMPS-34...
  • Seite 160 Baureihe / Series: LP 46 Order No.: 320-xxxxx Type: LP-46, LP-46K Baureihe / Series: LMRI 46 Order No.: 339-xxxxx Type: LMRI-46 Baureihe / Series: LMPI 46 Order No.: 340-xxxxx Type: LMPI-46 Baureihe / Series: LA 47 Order No.: 328-xxxxx, 338-xxxxx Type: LA-47 Baureihe / Series: LMR 48...
  • Seite 161 Baureihe / Series: LA 66 Order No.: 312-xxxxx Type: LA-66, LA-66K Baureihe / Series: LMR 70 Order No.: 335-xxxxx Type: LMR-70 Baureihe / Series: LA 80 Order No.: 314-xxxxx Type: LA-80 Baureihe / Series: LAK01 Order No.: 315-xxxxx Type: LAK01 TR-ELA-KE-DGB-0079-02.docx 4 / 4...
  • Seite 162 The Restriction of the Use of Certain Hazardous Substances in S.I. 2012 No. 3032 Electrical and Electronic Equipment Regulations 2012 under the sole responsibility of the manufacturer: Name and address of authorised representative: TR-Electronic GmbH TR-Electronic Ltd. Eglishalde 6 4 William House D - 78647 Trossingen Old St.
  • Seite 163 List of validity Series: LMRB 27 Order No.: 341-xxxxx, 343-xxxxx Type: LMRB-27 Series: LMP 30 Order No.: 322-xxxxx Type: LMP-30 Series: LMRS 34 Order No.: 344-xxxxx Type: LMRS-34 Series: LMPS 34 Order No.: 345-xxxxx Type: LMPS-34 Series: LP 38 Order No.: 307-xxxxx Type: LP-38 Series: LA 41...
  • Seite 164 Series: LP 46 Order No.: 320-xxxxx Type: LP-46, LP-46K Series: LMRI 46 Order No.: 339-xxxxx Type: LMRI-46 Series: LMPI 46 Order No.: 340-xxxxx Type: LMPI-46 Series: LA 47 Order No.: 328-xxxxx, 338-xxxxx Type: LA-47 Series: LMR 48 Order No.: 327-xxxxx Type: LMR-48 Series: LMP 48...
  • Seite 165 Series: LA 66 Order No.: 312-xxxxx Type: LA-66, LA-66K Series: LMR 70 Order No.: 335-xxxxx Type: LMR-70 Series: LA 80 Order No.: 314-xxxxx Type: LA-80 Series: LAK01 Order No.: 315-xxxxx Type: LAK01 TR-ELA-KE-GB-0080-02.docx 4 / 4...
  • Seite 166 AUFLOESUNG 0,005 MM MESSLAENGE 1.150,00 mm SCHNITTSTELLE Profinet IO AUSGANGSPEGEL RS485 VERSORGUNGSSPANNUNG 19-27V ANSCHLUSSART 1X4P.M8-STECKER 2X4P.M12-STECKER,D-COD(BUCHSE) ANSCHLUSSRICHTUNG AXIAL GEGENSTECKER NEIN STABLAENGE 1.271,00 mm Änderungen vorbehalten. TR-Electronic GmbH Eglishalde 6 78647 Trossingen Tel. +49 (0) 7425 228-0 Seite 1/4 info@tr-electronic.de www.tr-electronic.de...
  • Seite 167 Material - Mess-Körper Aluminium Strangpressprofil Magnet T1-S3818 andere auf Anfrage PROFINET IO - Schnittstelle - PROFINET IO – Device IEC 61158, IEC 61784-1 Änderungen vorbehalten. TR-Electronic GmbH Eglishalde 6 78647 Trossingen Tel. +49 (0) 7425 228-0 Seite 2/4 info@tr-electronic.de www.tr-electronic.de...
  • Seite 168: Umgebungsbedingungen

    <= 100 m/s² - Sinus 50…2000 Hz Schock - Kennwert <= 1000 m/s² - Halbsinus 11 ms Störfestigkeit DIN EN 61000-6-2 Störaussendung DIN EN 61000-6-3 Änderungen vorbehalten. TR-Electronic GmbH Eglishalde 6 78647 Trossingen Tel. +49 (0) 7425 228-0 Seite 3/4 info@tr-electronic.de www.tr-electronic.de...
  • Seite 169 Lagertemperatur, trocken -30…+85 °C Relative Luftfeuchte 98 %, keine Betauung Schutzart - Standard IP65 Magnetisches Störfeld DIN EN 61000-4-8 Schärfegrad 4 Mess-Referenz Messebene Änderungen vorbehalten. TR-Electronic GmbH Eglishalde 6 78647 Trossingen Tel. +49 (0) 7425 228-0 Seite 4/4 info@tr-electronic.de www.tr-electronic.de...
  • Seite 171: Steckerbelegung / Pin Assignment

    Series LMRB-27 Sicherheitstechnische Hinweise in der Montageanleitung www.tr-electronic.de/f/TR-ELA-BA-DGB-0004 beachten. Observe Safety informations in the Assembly Instructions www.tr-electronic.de/f/TR-ELA-BA-DGB-0004. L_-46, LM_I-46, LMP-30, LMRB-27 PROFINET IO (2xM12, 1xM8) L_-46, LM_I-46, LMRB-27 LMP-30 Pin X1 = PORT 1 / X3 = PORT 2; Flanschdose / Female socket (M12x1-4 pin D-coded)
  • Seite 172 Steckerbelegung / Pin assignment Diagnose-LEDs / Diagnosis-LEDs LMP-30 L_-46, LM_I-46, LMRB-27 BLINKEND / EIN / ON AUS / OFF FLASHING (grün / green) Link-LEDs Physikalische Verbindung vorhanden / Physical connection available Keine physikalische Verbindung vorhanden / No physical connection available (gelb / yellow) Data-LEDs Kein Datenaustausch /...

Inhaltsverzeichnis