ZAX Digital 85320 Installationsanleitung

D.I.GA.T.A-L
STEPI
EN Wood Stud Mounting
FR Montage de goujon en bois
GE Befestigung an Holztrågern
SP Montaje en viga de madera
STEP2
Attaching Brackets To Screen
Fixer Ies supports å I'écran
FR
Befestigung des Arms mit Bild schirm
Los dispositivos de fijaci6n a Ia pantalla
Item No.:85320
Installation guide
Guide d' installation
Installationsanleitung
Guia de instalaciön
Wood stud
Position wall plate so that it sits across the position of two studs. Positioning
does not have to be exact, rather find the approximate location of the studs,
then lay wall plate across those two locations.
Once wall plate is level and positioned correctly, hammer nails into wall board
at each hole position, as shown.
Attach TV brackets
mounting screws to find the screw that fits your TV VESA holes.
M4X12MM M4X20MM M5X12MM
A2(1
M6X20MM M8X 16MM M8X20MM
2X25 bolt Magnetic
A5(4PCS)
bubbie
Wall board, 1/4'(7mm) thick
Note: if you use screw sizes A 1 or A2, you
must also use
screw to bracket, If you use A3 or A4 screws,
do not use the A5 washers.
A5
to TV as shown above. Choose
M5X20MM M6X12MM
racket
Wail plate
ibb(
removable
level
Magnetic removable
bubble level
the A5 washers to secure the
x
from the available