Herunterladen Diese Seite drucken
Pure & Easy
ASSEMBLY
INSTRUCTIONS
FTPLCG-01124
FTPLCG-01125
FTPLCG-01126
FTPLCG-01127
JSSBJJ-V1
loading

Inhaltszusammenfassung für YitaHome FTPLCG-01124

  • Seite 1 Pure & Easy ASSEMBLY INSTRUCTIONS FTPLCG-01124 FTPLCG-01126 FTPLCG-01125 FTPLCG-01127 JSSBJJ-V1...
  • Seite 2 NOTICE IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY WICHTIG, FÜR SPÄTERE NACHSCHLAGE AUFBEWAHREN: SORGFÄLTIG LESEN IMPORTANTE, GUARDAR PARA REFERENCIA FUTURA: LEER ATENTAMENTE IMPORTANTE, CONSERVARE PER RIFERIMENTI FUTURI: LEGGERE ATTENTAMENTE IMPORTANT, À CONSERVER POUR RÉFÉRENCE FUTURE : LIRE ATTENTIVEMENT Assemble on a flat and solid surface.To avoid the unstable surface affecting the overall frame stability during installation.
  • Seite 3 Periodically Check That All Components Are Tightly Secured. Überprüfen Sie Regelmäßig, Dass Alle Komponenten Fest Gesichert Sind. Vérifiez Périodiquement Que Tous Les Composants Sont Bien Fixés. Controllare Periodicamente Che Tutti I Componenti Siano Ben Fissati. Verifique Periódicamente Que Todos Los Componentes Estén Bien Asegurados. It is recommended that multiple people assemble this product.
  • Seite 5 The following installation methods will provide better wind resistance performance, extend the product's lifespan, and help you maximize its value, delivering an even better user experience. If the deck you are installing is made of hardwood and has a depth exceeding 40mm, you can use ST8*35mm screws to secure it in place.
  • Seite 6 PARTS Item no. Reference Image Qty. Item no. Reference Image Qty.
  • Seite 7 Item no. Reference Image Qty. Item no. Reference Image Qty. X112 X120 M6X15mm M6X35mm...
  • Seite 8 Item no. Reference Image Qty. Item no. Reference Image Qty. M6X20mm...
  • Seite 9: Exploded View

    EXPLODED VIEW...
  • Seite 10 ASSEMBLY 4pcs 4pcs 12pcs 12pcs...
  • Seite 11 2pcs 2pcs 2pcs 48pcs 4pcs 12pcs X(6+6)
  • Seite 12 2pcs 2pcs 2pcs 64pcs 4pcs 12pcs X(8+8)
  • Seite 13 16pcs...
  • Seite 14 8pcs 16pcs...
  • Seite 15 4pcs 2pcs 2pcs 8pcs...
  • Seite 16 4pcs...
  • Seite 17 4pcs...
  • Seite 18 4pcs...
  • Seite 19 4pcs 4pcs 2pcs...
  • Seite 20 8pcs 12pcs...
  • Seite 21 8pcs 8pcs 8pcs 16pcs F5 F7 F5 F7...
  • Seite 22 2pcs 2pcs CC GG...
  • Seite 23 3pcs 3pcs 4pcs 10pcs 3pcs 8pcs 11pcs 6pcs Start installation from a corner, then continue in a clockwise or counterclockwise direction to install the panels. Note that once a panel is installed, a corresponding edge trim needs to be attached and secured with screws to prevent any injury from falling panels.
  • Seite 25 4pcs 3pcs 2pcs 2pcs 3pcs Start installation from a corner, then continue in a clockwise or counterclockwise direction to install the panels. Note that once a panel is installed, a corresponding edge trim needs to be attached and secured with screws to prevent any injury from falling panels.
  • Seite 26 3pcs 4pcs 2pcs 2pcs 4pcs Start installation from a corner, then continue in a clockwise or counterclockwise direction to install the panels. Note that once a panel is installed, a corresponding edge trim needs to be attached and secured with screws to prevent any injury from falling panels.
  • Seite 27 3pcs 3pcs 3pcs 3pcs 4pcs 8pcs 12pcs 17pcs 21pcs 3pcs 3pcs 3pcs 3pcs 3pcs 3pcs 20pcs 6pcs 2pcs Start installation from a corner, then continue in a clockwise or counterclockwise direction to install the panels. Note that once a panel is installed, a corresponding edge trim needs to be attached and secured with screws to prevent any injury from falling panels.
  • Seite 28 2pcs 2pcs 10pcs...
  • Seite 29 2pcs 4pcs 4pcs 6pcs...
  • Seite 30 Attach wire mesh to the underside of the top roof frame.
  • Seite 31 2pcs...
  • Seite 33 12pcs 12pcs Drill holes Insert expansion bolts Soft Ground Align the leg tubes with Put on the spacer and the anchor holes and nut, then tighten the place them in position. nut to secure Hard Ground...
  • Seite 34 1. The product must be installed on a solid base, such as cement or a floor, to prevent damage from strong winds and potential property or health risks. 2. If the product cannot be securely fixed, you must detach and store it properly before heavy winds occur.
  • Seite 35 Installation Completed Installation Abgeschlossen Installation Complétée Installazione Completata Instalación Completada...
  • Seite 36 HELP CENTER Inquiry Assembly issue Missing parts If you encounter any difficulties during assembly, please contact us. Wenn Sie während der Montage auf Schwierigkeiten stoßen, kontaktieren Sie uns bitte. Si vous rencontrez des difficultés lors du montage, veuillez nous contacter. Se incontri difficoltà...

Diese Anleitung auch für:

Ftplcg-01125Ftplcg-01126Ftplcg-01127