Werbung
Quicklinks
Werbung
Inhaltszusammenfassung für Scanstrut HELM POD SPH-8
- Seite 1 Scanstrut Scanpod Installation Instructions HELM POD ®...
- Seite 2 23-08-19 Issue H SPH-8, SPH-9, SPH-12, SPH-13 Parts List Tools Required Pod Back 60548 Short Saddle Pack Long Saddle Pack 190SPH3 Jigsaw/Spiral 60453 For ø25mm (1“) tube: ø20mm (25/32”) hole saw SPH-8, SPH - 9 SPH-12, SPH-13 For ø32mm (1 1/4”) tube: ø25mm (1”) hole saw 2 x 190SPH3 4 x 190SPH3...
- Seite 3 Helm Pod Maximum Maximum Overall cut-out area usable face dimensions mm / inches mm / inches mm / inches mm / inches mm / inches mm / inches SPH-3i-W 368/14.5 118/4.65 390/15.35 140/5.5 432/17 181/7.1 SPH-4i-W 498/19.6 118/4.65 520/20.5 140/5.5 187/7.4 562/22.1 267/10.5...