CARLO GAVAZZI D/P PA01 Installationsanleitung

TRMS 3-phase voltage monitoring relay
D/P PA01
D/P PA02
DPA51
DPA71
Connections
(*) NOTE: fuses F of 315 mA delayed, if required by local law.
L3
L2
L1
(*) F
µ
L1 L2 L3 12 14
m<3
L2
L3
11
DPA01C, DPA02, DPA51
L3
L2
L1
(*) F
µ µ
L1 L2 L3 12 14 22 24
m<3
L2
L3
11 21
DPA01D, DPA71
Adjustment
Turn power ON, if all the 3 phases are present in the proper sequence, the green LED turns ON, the output relay and the yellow LED are ON.
Mounting
Hang the device to the DIN-Rail being sure that
the spring closes. Use a screwdriver to remove
the product
Installation instructions
Code 8022287/160523 INSTRUCTION SHEET
XPA01/XPA02/DPA51CM44/DPA71 V4
www.gavazziautomation.com
PPA01C, PPA02
PPA01D
Packaging
The packing material should be kept for redeliv-
ery in case of replacement or repair.
Scan to read me in your language!
Scannen Sie, um mich in Ihrer Sprache zu
lesen!
Scanne pour me lire dans ta langue !
Connect the 3-phase power supply taking care of the sequence.
Connect the relay output according to the ratings.
Keep power OFF while connecting!
DPA PPA Terminals
L1, L2, L3 5, 6, 7 Power supply
11, 12, 14 1, 3, 4 Relay output
2nd relay output (DPA01D, DPA71, PPA01D)
21, 22, 24 8, 9, 10
Each terminal can accept up to 2 x 2,5 mm
1 x 2,5 mm wires (DPA51/DPA71).
2
CE-marking and approvals
¡Escanea para leerme en tu idioma!
Scansiona per leggermi nella tua lingua!
Scan for at læse mig på dit sprog!
扫码后选择相关语言进行阅读！
Tightening torque
D/P PA01, D/P PA02
(DPA01/ DPA02) /
2
DPA51, DPA71