Seite 1
Aufbauanleitung / assembly instructions mod. 2924, 2925 RENO fest Bitte diese Aufbauanleitung sorgfältig aufbewahren! Please keep this assembly instructions safe! 90/10/10 M10 x 60 M10 x 90 M6 x 30 Unterbau Holzsäule Holzsäule Metallstreben 1.Montagematerial. 1. Fitting material. 2. Den Oberbau umgedreht ablegen. Die Verpackung öffnen.
Seite 2
M10 x 60 3. Vier Schrauben ausdrehen und aufbewahren. Die Spanplatte entfernen. 3. Uncrew four srews and keep them. Throw away the chipboard. M10 x 90 Verstärkungsklötze / supporting blocks 4. Die Verstärkungsklötze aus der Holzsäule entnehmen. und auf die Bodenplatte schrauben. 4.
Seite 3
M10 x 60 5. Die Bodenplatte mit der Holzsäule verschrauben. Die zweite Spanplatte abschrauben und entfernen. 5. Screw the base plate to wooden column. Unscrew the second chipboard and throw away. 3 / 4 2924, 2925 RENO fest Änderungsdatum: 16.06.23...
Seite 4
M6 x 30 6. Den Unterbau mit den Halteklötzen des Tischoberbaus verschrauben. 6. Screw on the table base to the mounting blocks of the table top. 7. Den fertig montierten Tisch wenden. 8. FertigerTisch. 7. Turn the assbled table. 8. Finished table. 4 / 4 2924, 2925 RENO fest Änderungsdatum: 16.06.23...