Blaupunkt FHM601 Bedienungsanleitung Seite 9

FHM601
TECHNICAL DATA
Voltage: 220-240V~50Hz
Power: 2000W
1. Switch knob with integrated thermostat
1a. Deactivated
1b. Cold airflow (only the fan is running)
1c. Warm air blower (1000 W), continuous
operation
SAFETY FEATURES
In case of overheating, thermostat will turn off the device. Unplug the heater and wait until it
cools down. Find the cause of overheating. Heater can be plugged in and switched back on after
cooling down.
OPERATING INSTRUCTIONS
Start the appliance by turning the knob to the desired mode. If you wish to use the thermostat to
regulate the temperature, set it to Mode II Max. Once the desired temperature has been reached, turn
the thermostat knob to Min until the thermostat sounds. The appliance will maintain the selected
temperature by switching the heaters on and off.
CLEANING AND MAINTENANCE
Before cleaning the heater make sure that it has been switched off, unplugged from the power socket.
Make sure the device has cooled down sufficiently.
Air inlets and outlets should be free of dust. Clean with dump cloth and wipe dry.
1d. Hot air blowing (2000 W), thermostatically
controlled operation
1e. Thermostat setting range from MAX to MIN.
2. Air outlet grilles
7