Please read this user manual carefully to fully understand the
usage of your purchase. Keep the manual for future reference
since it contains important information.
LAYOUT
1. Cable strain-relief clamp
2. ON/OFF switch
3. Guard hood
4. Guide wheel
5. Additional handle
6. Safety lock-off
7. Rear handle
EXPLANATION OF THE WARNING SIGNS
1. Important.
2. Read the directions for use before operating the tool.
3. Wear goggles and ear protectors.
4. Do not use the tool in rain or snow. Do not expose the tool to
wet conditions.
5. Keep all other persons away from the working area.
6. Beware of objects ricocheting out of the guard.
7. Switch off the tool and pull out the power plug before carrying
out any cleaning or maintenance work.
8. Rotating parts. Keep your hands and feet away from the
brush.
IMPORTANT.
When using the equipment, a few safety precautions must be
observed to avoid injuries and damage.
Please read the complete operating instructions and safety
information with due care. Keep these operating instructions in
a safe place so that the information is available at all times. If
you give the equipment to any other person, hand over these
operating instructions and the safety information as well. We
cannot accept any liability for damage or accidents which
arise due to a failure to follow these instructions and the safety
information.
1. SAFETY INFORMATION
Please refer to the booklet included in delivery for the safety
information.
CAUTION
Read all the safety regulations and instructions.
Failure to follow the safety regulations and instructions may
result in an electric shock, fire and/or serious injury.
Keep all safety information and instructions in a safe place
for future use. This equipment is not designed to be used by
children or people with limited physical, sensory or mental
capacities or those with no experience and/or knowledge of the
equipment.
2. ITEMS SUPPLIED
Open the packaging and take out the equipment with care.
Remove the packaging material and any packaging and/or
transportation braces (if available). Check to see if all items are
supplied. Inspect the equipment and accessories for transport
damage. If possible, please keep the packaging until
the end of the guarantee period.
IMPORTANT
The equipment and packaging material are not toys. Do not let
children play with plastic bags, foils or small parts. There is a
danger of swallowing or suffocating!
Guard hood (3), Guide wheel (4), Wire brush (8), Nylon brush
(9), 4 x screws 3.5x13 (10), Nut M8 (11), 1 x open-ended
wrench (12), 1 x pin (13), Main housing (14), Original operating
instructions & Safety information.
3. INTENDED USE
The equipment is designed to remove weeds from between
paving stones and slabs. It is not intended for use on sensitive
surfaces like tiles. The equipment is to be used only for its
prescribed purpose. Any other use is deemed to be a case of
misuse. The user/operator and not the manufacturer will be
liable for any damage or injuries of any kind caused as a result
of this. Please note that our equipment has not been designed
for use in commercial, trade or industrial applications. Our
warranty will be voided if the equipment is used in commercial,
trade or industrial businesses or for equivalent purposes.
4. TECHNICAL DATA
Mains voltage: 230 -240V~ 50 Hz
Power input: 140 W
Idling speed: 1200 rpm
Max. brush diameter 100 mm
Protection class: II
Weight: 1.7 kg
SOUND AND VIBRATION
Sound and vibration values were measured in accordance with
EN 60745.
Sound pressure level LpA: 68 dB(A)
Sound power level: LWA 88 dB(A)
K: 3 dB
User manual
Weed Sweeper