Jumper And Fuses On The Printed Circuit Boards - Siemens 7XT3300-0*A00 Handbuch

7XT3300-0*A00

Jumper and Fuses on the Printed Circuit Boards

Power supply module C53207-A332-B12-, 7XT3300-0*A00/DD and higher
*)
NZT
C53207-A332-B12-
Figure 3 Power supply module with location of the fuses
C53000-B1174-C129-6
Fusible cut -out insert 4AT, type 5 x 20 mm
a) Schurter 0001.2510
b) Siba 179200 4A
c) SOC SHV12 4A
W arning : Only the given fusible cut-out insert
m ay be used. A safe operation can be
guaranteed by the com plete auxilary voltage
range only in such a w ay.
Fusible cut-out insert 5AT
a) Schurter OMK 125
b) Littelfuse Series 154 154.005
W arning: R eplace the fuse only by the original
type because the holders are designed for this
type only.
4AT *)
F301
The fusible link inserts m ust be replaced only by
the types m entioned. If other types are used , the
param eters and properties given for the device
no longer apply .
3404.2317.11
F103
4AT *)
F102
F101
English
5 A
F602
35