3. After work disconnect the air tool from the compressed
air supply.
Air Pressure and Air Volume
▪ The air blow gun requires clean and oil-free air.
Therefore, do not use an oil-fog lubricator within the air
supply system.
▪ If possible, only use compressed air hoses for the air
supply that previously have not been used with other air
tools which required an oil-fog lubrication system.
▪ Operate the air blow gun with a pressure of 6.3 bar.
When using higher pressure than the max. permitted
pressure of 8 bar, its self-life will be reduced drastically.
Operate the air blow gun using a compressor with an air
suction capacity of at least 160 l/min. The ideal capacity
is provided by compressors with a suction capacity of
200 – 300 l/min.
▪ Only use air hoses with an inner diameter of at least 9
mm. When setting up the air pressure, always keep in
mind that the pressure will decrease by approx. 0.6 bar
when using a 10 m long hose with an inner diameter of
9 mm.
Maintenance and Care
▪ To ensure proper functionality and a long lifetime,
diligent maintenance is essential.
▪ Add a few drops of oil to the sealing of the trigger pin in
regular intervals. Apart from that the air blow gun is
maintenance free.
Maintenance and Care
12