Cleaning And Maintenance - Blaupunkt HOR811 Bedienungsanleitung

HOR811
CAUTION: It is worth remembering that when using the radiator's delayed-switch-on function, the
appliance can switch on when left unattended. Always observe all the safety instructions for the
product's use.
The radiator's delayed-switch-off function: When the radiator is operating in one of the operating
modes, press the timer button. The hour symbol (H) and the time (0) will appear on the display. User
the + or - buttons to select the expected switch-on-delay time of the radiator between 1 and 24 hours.
After the selected time has elapsed, the appliance enters the standby mode.
Child lock: To activate the child lock, press and hold both the operating-mode-selection button and
the power switch at the same time for 3 seconds. The buttons will be locked to prevent the accidental
pressing of the control buttons. To unlock the control panel, press and hold both the operating-mode-
selection button and the power switch at the same time again for 3 seconds.
Deactivating the audible signals when pressing the buttons: To deactivate the audible signals each
time you press the control buttons, press and hold the + and - buttons at the same time for 3 seconds.
To deactivate this function, press and hold the + and - buttons at the same time again for 3 seconds.
Remote control: The buttons on the remote control correspond to the control panel's buttons, and
perform the same functions.
OVERHEATING PROTECTION
The radiator is protected with overheating protection which automatically switches off the appliance
if it intensely overheats. In that event, disconnect the appliance from the mains, wait approx. 30
minutes for the radiator to cool down, and rectify any possible cause of the overheating, e.g.,
something covering the radiator. Check the appliance, cable, and plug for damage. If no damage is
observed, reconnect the appliance and switch it on, according to the manual. If the radiator does not
switch on, contact the customer service for assistance.

CLEANING AND MAINTENANCE

During use, clean the appliance regularly according to the following instructions.
1. Disconnect the appliance from the power source, and let it cool down before cleaning.
2. Gently clean the appliance's external surface and control panel with a damp and lint-free cloth.
3. If there is dust in the appliance's slots, it is recommended to blow it out with a vacuum cleaner or
blower.
4. Do not use strong detergents, chemical cleaners, or solvents.
DEVICE CONTROL APP
To be able to use the app control function for your device, you must have a registered user account in
the "Tuya Smart" system. You can download this application from Google Play or App Store. You can
also search for it using the QR link below:
After launching Tuya Smart, the user will be asked to log in to the app or register a user account with
the system.
(timer, minus, mode). When the WiFi
8