Calcification Protection Function; Disassembly - Silvercrest 354199 2010 Bedienungs- Und Sicherheitshinweise

Set a heating pause, for example, when you do not
want to use the heating during the summer months.
At the end of a heating pause, you can either
switch back to automatic mode or programme new
heating and energy-save times.
The frost protection function remains active during
a heating pause.
1� Switch to Manual mode (refer to Section Set-
ting Manual Mode on Page 78).
2� Turn the Setting wheel (5) until
the display (3).

Calcification Protection Function

This function is automatically active.
The device completes a calcification protection
function cycle every Friday at 11:00 a.m. to pre-
vent calcification of the radiator valves.
11� Disassembly
Caution! Risk of burns through
hot radiator valve! Contact could
lead to hands being burned.
▸ Allow the radiator to cool down
before completing any installation,
disassembly or repair work on the
device!
▸ Wear work gloves!
1� Switch to Manual mode (refer to Section Set-
ting Manual Mode on Page 78).
appears in
85
Gi