Cleaning And Care; Troubleshooting - Silvercrest SSE 6 B2 Bedienungs- Und Sicherheitshinweise

Cleaning and care

product in water.
Note: If no longer use, clean the empty soap/hand disinfectant
container by rinsing it with clean water. Fill the soap/hand disin-
2
fectant container
times to remove the soap completely. The product may get damaged
if the soap is not removed completely.
Remove the batteries from battery compartment
outside surface and battery compartment
Use a slightly moist, fluff-free cloth and a mild detergent to remove
stubborn dirt.
Do not use corrosive cleaning agents. These substances may dam-
age the basic material of the product.

Troubleshooting

= Problem
= Cause
= Remedy
The soap, washing-up liquid or hand disinfectant liquid
is dispensed slower than usual from the soap /hand
disinfectant outlet
The batteries are too weak.
Replace the batteries (see "Inserting/Replacing the batteries").
Water has entered the battery compartment
Allow the battery compartment
batteries (see "Inserting/Replacing the batteries").
DANGER OF EXPLOSION! Do not immerse the
with clean water and repeat this step several
2
or the product does not work.
4
7
by using dry, fluff-free cloth.
7
.
7
to dry completely. Insert new
7
and clean the
GB 15