Product Information; Security Information - Siemens SIMATIC ET 200SP Produktinformation

SIMATIC
ET 200SP
Dependencies during configuration with GSD files for
ET 200SP fail-safe modules

Product Information

Security information

Siemens provides products and solutions with industrial security functions that support the secure operation of plants,
systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement – and
continuously maintain – a holistic, state-of-the-art industrial security concept. Siemens' products and solutions constitute one
element of such a concept.
Customers are responsible for preventing unauthorized access to their plants, systems, machines and networks. Such
systems, machines and components should only be connected to an enterprise network or the internet if and to the extent
such a connection is necessary and only when appropriate security measures (e.g. firewalls and/or network segmentation)
are in place.
For additional information on industrial security measures that may be implemented, please visit
(https://www.siemens.com/industrialsecurity).
Siemens' products and solutions undergo continuous development to make them more secure. Siemens strongly
recommends that product updates are applied as soon as they are available and that the latest product versions are used. Use
of product versions that are no longer supported, and failure to apply the latest updates may increase customers' exposure to
cyber threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS Feed visit
(https://www.siemens.com/cert).
Introduction
Note the following dependencies for PROFINET IO during configuration of ET 200SP fail-safe modules per with GSD file.
Note
When using ET 200SP fail-safe modules with the GSD file on external masters, note that the warnings, information and
references contained in the F-module device manuals are still valid for other manuals.
Please also observe the external master specifications.
Requirement
ET 200SP fail-safe modules can be used with the GSD file on the following interface modules:
• IM 155-6 PN ST as of V3.1
• IM 155-6 PN HF as of V3.1
• IM 155-6 PN/2 HF as of V4.2
• IM 155-6 PN/3 HF as of V4.2
• IM 155-6 PN HS as of V4.0
• IM 155-6 MF HF as of V5.0
An S7-FCT is required to calculate the F_iParCRC and address the F-I/O.
6
© Siemens AG 2020 - 2022. All rights reserved
A5E32311847-AD, 04/2022