Using The Touch Control Sensors - Samsung C61RCCN Einbau- Und Betriebsanleitung

Hob Use (Continued)
• Always position pots and pans before switching on the cooking zone.
EN
• Dirty cooking zones and pan bases increase power consumption.
• When possible, position the lids firmly on the pots and pans to cover completely.
• Switch the cooking zones off before the end of the cooking time to use the residual heat
for keeping foods warm or for thawing.
• The base of the pan should be the same size as the cooking zone.
• Using a pressure cooker reduces cooking times by up to 50 %

Using the touch control sensors

To operate the touch control sensors, touch the desired panel with the tip of your pointed fin-
ger until the relevant displays illuminate or go out, or until the desired function is activated.
Ensure that you are touching only one sensor panel when operating the appliance. If your
finger is too flat on the panel, an adjacent sensor may be actuated as well.
15
C61RCCN_XAG-00060A-01_EN.indd 15 2007-09-18 ｿﾀﾈﾄ 12:12:05