Manual Setting; Setting The Alarm - Hama RC 650 Bedienungsanleitung

Display
Display ashing
Displayed
continuously
Not displayed

5.2 Manual setting

Manually setting the date/time/
calendar
• Press and hold the Down (10) button
for approx. 3 seconds to stop the
search for the DCF signal. The radio
icon (2) goes out and you can set the
time manually.
• Press and hold the SET button (9) for
approx. 3 seconds to start manually
setting the date/time.
• Set the following information in the
order listed:
• To select the individual values, press
the UP (8) button or the Down (10)
button and con rm each selection by
pressing the SET button (9).
• After setting the date, you will be
able to select the language in which
the weekday will be displayed. You
can choose between the following
languages:
4
Searching for the
DCF signal
Active
Successful – signal
is being received
Deactivated
• GER for German, ENG for English,
FRA for French, ITA for Italian, NET
for Dutch, ESP for Spanish, DAN
for Danish
Note – Summer time
The clock automatically switches to
summer time. S appears on the display
as long as summer time is activated.
Note – Time zone
• The time zone is used if the DCF time
signal is received in a country whose
time zone does not correspond to
German time.
• If the time shift is +1 hour, for
example, you need to set the time
zone to +1. This will automatically set
the clock forward one hour.

5.3 Setting the alarm

Setting Alarm 1
• Press the AL1 (7) button. The bell
icon appears.
• Press the AL1 (7) button for approx.
3 seconds until the hour digits start
ashing. You can set the hours with
the UP (8) and DOWN (10) buttons.
• Press the SET (9) button until the
minutes digits start ashing. You can
set the minutes with the UP (8) and
DOWN (10) buttons.
• Press the SET (9) button to save the
set alarm time.
Setting Alarm 2
• Press the AL2 (11) button. The (bell)
icon appears.