Optical Mode - Kenwood LS-600BT Bedienungsanleitung

• Using an ARC compatible HDMI cable (not included in the scope of delivery) connect the HDMI TV
(ARC) connection to the Soundbar with the HDMI (ARC) connect on the remote control.
The HDMI (ARC) connection on the TV might be labelled differently.
• If an HDMI cable is connected, the audio setting of the TV in the "audio output" must be set to
<external PCM-Stereo>, and the audio output mode must be set to <automatic> or <decoded
output in PCM format>. If the HDMI cable is connected, the digital audio output of the TV will be
set to the PCM format.
• Press the <INPUT> button on the remote control or the <STANDBY> button on the Soundbar to
select the HDMI (TV ARC) mode.
• Set the volume and the sound mode with the corresponding button on the remote control.
Please note:
If you connect a device such as a TV/ Set-Top-Box/DVD/Game console with HDMI (ARC) cable, set
the audio output mode of the device to PCM mode <digital TV(ARC) output>. Different TVs might
have different setting modes, but the operating principle is the same way. If you want to connect a
Setup Box, please first connect the TV (ARC) connection to the Soundbar and then the Set-Top Box.

6.2 OPTICAL Mode

Connect the Soundbar and the TV with an optical cable (not included in the scope of delivery).
Use this mode to playback the audio from a TV with optical digital output on the Soundbar. Select
the optical connection in the sound settings of the TV (output for Audio). If the optical cable is
connected, the audio output of the TV is set to PCM format. The TV must have an optical digital
output. Use a commercially available optical cable.
OPTICAL
• Connect the optical cable to the optical digital output of your TV.
• Connect the optical cable to the optical digital output of the Soundbar.
• Switch on the TV and the Soundbar. Set the connected TV to "PCM Stereo". Set the audio output
mode to <automatic> or <decoded output in PCM-Format>.
OPTICAL
11