Hitachi PC-ARFP1E Installations- Und Betriebshandbuch Seite 26

TEST RUN MENU
Element Optional function
Lower limit of setting
temperature for cooling
FC
(Minimum value of
setting temperature
allowed in cooling)
Upper limit of setting
temperature for heating
Fd
(Maximum value of
setting temperature
allowed in heating)
Not used
FE
Not Used
FF
No indication of
H1
maintenance alarm
Indication of hot start
(No Indication of
H2
operation limitation)
Not used
H3
Not Used
H4
KPI: Operation modes
for the ventilation unit
with energy recovery
Not used
J1
18 PMML0496 rev.1 - 12/2020
Individual
Settings
setting
Function disabled
19 °C is the standard minimum set
00
point. (factory setting)
+1 ºC (Lower limit 20 ºC)
01
+2 ºC (Lower limit 21 ºC)
02
+3 ºC (Lower limit 22 ºC)
03
X
·
·
·
·
·
·
+8 ºC (Lower limit 27ºC)
08
+9 ºC (Lower limit 28 ºC)
09
+10 ºC (Lower limit 29 ºC)
10
Function disabled
30 ºC is the standard maximum set
00
point. (factory setting)
-1 ºC (Upper limit 29 ºC)
01
-2 ºC (Upper limit 28 ºC)
02
-3 ºC (Upper limit 27 ºC)
03
X
·
·
·
·
·
·
-10 ºC (Upper limit 20 ºC)
10
-11 ºC (Upper limit 19 ºC)
11
-12 ºC (Upper limit 18 ºC)
12
00
- -
01
02
00
O -
01
Displayed
00
–
Hidden
01
Displayed
00
X
Hidden
01
00
– -
01 / 02
-
00
–
-
01
Air conditioning only
00
(factory setting)
O Ventilation only
01
Air conditioning + ventilation
02
00
- -
01
Setting conditions
This function defines the lowest
temperature setting value for FAN/
COOL/DRY modes.
This function defines the highest
temperature setting value for
HEATING mode.
Models:
RPF(I)-)FSN2E
up to 20ºC (FC=10)
Use at 00 conditions
Use as 00 conditions
This function is used to display
or hide the maintenance alarm
indication.
This function is used to display or
hide the automatic control indication.
Models:
RPF(I)-FSN2E
Not available, use at 00 conditions
Use at 00 conditions
Use at 00 conditions
This function is only available for
ventilation units with energy recovery.
Use at 00 conditions
Description