To Project An Object On The Digital Presenter - Samsung SDP-900DXA Benutzerhandbuch

SDP-900DXA
Using the presenter

To project an object on the digital presenter

1
Set up your digital presenter properly.
(See page 15.)
2
Connect the presenter to a PC monitor or projector to display the image.
(See page 15.)
3
Turn the power of the output device and the digital presenter on.
4
Place the object on the document plate, and adjust the head to
face the object.
If there is no image on the PC monitor or the projector, check if the cable is properly
connected and press the INT/EXT button of the presenter to select the input mode to INT OUT.
20
Page
All manuals and user guides at all-guides.com