Product Description; Intended Use; Introduction - Husqvarna DC 6000 Bedienungsanweisung

Introduction................................................................... 76
Safety............................................................................78
Assembly...................................................................... 82
Operation...................................................................... 82
Maintenance................................................................. 85

Product description

The product is a dust extractor with a suction hose. Air
with dust is suctioned into an inlet valve through the
suction hose. The air decreases in speed by a cyclone
which cause the dust particles to move apart from the
air. Small dust particles and air goes through a 2 filter
system. Large dust particles are collected in the cyclone
and fall through the bottom flap into a plastic bag.

Intended use

The product is used to clean construction areas by
collecting up dry and non flammable dust in indoor
environments.
76
Contents
Troubleshooting............................................................ 94
Transportation, storage and disposal........................... 95
Technical data.............................................................. 97
Declaration of Conformity............................................. 99

Introduction

The product can be connected to medium and large
surface preparation equipment such as grinders.
The product is intended for commercial use, for example
in hotels, schools, hospitals, factories, shops, offices
and rental businesses
Note:
The explosion limit value for the not flammable
dust is >0.1mg/m
Dust storage system
All Husqvarna DC 6000s are to be used with Longopac.
Only change Longopac after the filter cleaning cycle has
been completed.
3
.
1883 - 001 - 01.06.2022