Oil the blade bar with machine oil after cleaning and before using the hedge
trimmer again.
When cleaning or maintaining the hedge trimmer, first disconnect from power
mains.
Remove dirt from the blade bar with a scrubbing brush or a small brush.
Please note that there is a foam pad in the opening between the motor
housing and the blade bar. Do not remove this foam pad.
Do not clean the housing with sharp detergents or aggressive chemicals in
order not to damage the surfaces. Use only a lightly moistened cloth for
cleaning. Clean the ventilation slots with a soft brush.
Store the hedge trimmer in a dry, dust-free and frost-protected place.
When not in use and when storing the hedge trimmer, always slide the blade
bar protection over the blade bar.
Maintenance and Cleaning
Blade Bar
19
Blade Bar
Protection