Cleaning And Care - Grundig HD 3100 Bedienungsanleitung

SETTINGS/OPERATION
Settings
Your appliance has the following settings:
Blower/temperature level
– : Off
0
– : Gentle air flow
1
temperature approx. 60° C
– : Strong air flow
2
temperature approx.75° C
*
– : Cool shot
Operation
Check if the mains voltage on the type plate (on
the handle of the device) corresponds to your
local mains supply.
1
Towel dry your hair thoroughly after washing.
2
Attach the D concentrator nozzle on the hair
dryer and align it as required.
3
Plug the power cord
4
Turn on the appliance with switch
the blower/temperature level.
5
While drying, you can interrupt the hot air
flow, by pushing up switch
(Cool Shot).
Note
The Cool Shot interrupts the hot air with a flow
7
of cold air. This allows you to fix your hairstyle
better and more lastingly.
6
After use, switch off the appliance with the
switch and pull out power cord
the wall socket.
Caution
Never wind the power cord around the appli-
7
ance, as this can result in damage.
Check the power cord and the appliance regu-
larly for visible damage.
B
into the wall socket.
A
B and set
to the very top
B
from
A
_______________________________________

Cleaning and care

Pull the plug out before cleaning.
Never submerge the appliance in water.
Use a soft, dry cloth to clean the housing.
Remember to clean the air inlet grille
sionally with a soft brush to remove hairs and
dust.
Take off the air inlet grille
at regular intervals. Pull back the grille to do this.
B
occa-
C
and clean the filter
C
11
ENGLISH